Your cart is empty.
Your cart is empty.Product Description
Beduan Male Thread Stainless Steel Pipe Fittings
304 stainless steel strength and resistance to corrosion
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available with threaded or unthreaded fittings in many shapes, styles, sizes, and schedules (pipe wall thickness).
Application：
This Nipple Cast Pipe can be used for oils, air, water, liquids, steam and gasses.
Specification：
- Made of 304 stainless steel，with a long service life and good mechanical and physical properties
- Temperature range from -65 to 250 degrees F
- Maximum working pressure is 435 psi/3MPa
- The smooth edges, precision production makes work easier,more effective and convenient installation
Bruce B.
2025-08-25 10:00:27
I purchased a large reverse osmosis pressure tank to greatly increase my system capacity. The tank came without a valve. The separately purchased shut-off ball-valve came with a right-angle fitting and a very short (1/4-inch?) connector. The tank has a nice base that would accommodate the valve underneath the tank, thereby saving the added height of having the valve on top. The tank will operate in any position but having the compressed air bladder on top and the water and valve on the bottom works with gravity, rather than against it. Also, a bottom-heavy tank is more stable than a top-heavy one. Problem: the full tank weighs about 100 pounds and operating the valve under the center of the tank would be inconvenient, to say the least.I used the 6-inch stainless-steel pipe to replace the short connector, in order to place the shut-off valve to the side of the tank bottom, just outside of the base, for easy, convenient access. I used 4 wraps of plumber's Teflon tape on each end of the stainless-steel pipe before threading it into the tank fitting at one end and the shut-off valve at the other end. It works perfectly with no leaks. The pipe shipped to my Amazon locker, which I like because it eliminates concern about porch-pirates.
Big Len 5
2025-08-02 15:09:15
I purchased this 4-inch stainless steel pipe to make an oil drain extension for my riding lawn mower with a Briggs & Stratton engine. The 3/8-inch NPT male thread screws right into the Briggs & Stratton oil sump. I sealed the threads with teflon tape. This set up allows for much simpler and cleaner oil changes. I'm very happy with this purchase!
Juan G.
2025-07-29 17:40:12
Excelente
The Hendersons
2025-06-21 11:06:26
The picture shows it being polished. Read the description before you buy. The vendor was prompt however.
jr
2025-06-19 19:10:58
exlent product
Janette Marie
2025-06-07 14:06:25
Great
Bobby Slate
2025-05-03 14:06:06
Nice quality pipe but as many others stated, the threads are too short and not npt. No taper. Bottoms out in fittings and will not make a water tight connection. Update: seller contacted me and sent me a new product with better cut threads. Threads are now npt.
Food Guy
2025-03-06 13:05:56
It caused the water hose to leak. I tried a second hose thinking it was the hose.
TC
2025-01-21 16:33:45
Works perfectly.
Tinoco
2025-01-08 10:22:08
excelente calidad y tamallo
Reynaldo ortiz
2024-12-07 15:33:57
Quedó muy bien en donde lo instalé ybtiene muy buen acabado.
colin kenny
2024-12-02 15:25:20
As advertised, quality item, well packed
LETICIA
2024-12-01 14:36:26
LLEGÓ EN COLOR SATIN Y NO EN CROMO COMO SE VE EN LA FOTO
Recommended Products