Your cart is empty.
Your cart is empty.Product Description
Chuck H.
2025-08-30 16:00:11
Easy to install. Solved my leak issue I had with the original 22yr old valve. Great price and seems well built.
Scott B.
2025-07-27 15:51:11
Perfect fit. Works great!
Joseph P.
2025-07-26 17:20:24
Replacement for my RV toilet. Easy to install.
Bob
2025-07-25 12:21:41
Quality products with excellent customer service
John Swinford
2025-06-29 15:46:10
Sturdier than other brands.The initial review stands, but with a caveat.I installed this valve in mid October 2024. It is now November 24th. The valve failed.Here is what my inspection found, and with it still makes this a good replacement.-the failure was that the unit would not shut off, which in an RV toilet can be catastrophic.-1. we maintain softened and filtered water, so water quality is ruled out.-2. The valve can be disassembled easily to clean and inspect.THE CULPRIT IN MY OPINION IS THAT THE VALVE STEM TOP SEAL BECAME DRY AND CAUSED THE BRASS STEM TO STICK.I REMOVED THE STEM AND CLEANED THE VALVE, REASSEMBLED, APPLIED PLUMBERS GREASE TO THE UPPER PART OF STEM. Tested the valve actuator for free movement and travel.
dejanaye knox
2025-06-25 17:56:47
Just what I needed to fix the toilet in the mobile home
Customer
2025-06-07 17:17:12
Fits perfectly and solved our problem with the old valve sticking open.
Larry N.
2025-05-24 11:52:10
Works
Brian Parlee
2025-04-29 13:52:19
The original Sealand part was made of an inferior plastic that would be more prone to cracking or freeze damage. The Sealand part also now has been "downgraded" from the original design by using a non-removeable cap so when the interior seal wears out it can not be replaced.This Beech Lane valve appears to be made of nylon (hence it's yellowish tinge )and is much tougher. It is indicated that freezing will not damage it and that would be quite true for a nylon part. Also, the bottom cap can be screwed off if a seal replacement is required.I'm very happy with this upgraded design and would recommend it.
Customer
2025-04-06 10:56:28
Installed last week, no issues
Randy Doherty
2025-03-22 10:59:06
Item leaked where the plunge rod enters the valve body and it came with just a cheap plastic spring cap on the bottom of the valve body not a brass screw on cap as advertised
JFP
2025-02-08 13:45:05
Direct fit and replacement. Very quick to install. No more slow leak from the old part but will still keep an eye on it until I gain total confidence in it, but I'm not really concerned. Less $ than expected and fast shipping.
hillspa
2025-02-05 17:06:56
Installed with some reservation as it arrived with a plastic bottom cap. It was not brass as stated but PAINTED plastic to look like brass !!Has not leaked yet so hence 3 stars.
Recommended Products