Your cart is empty.
Your cart is empty.Product Description
Beach Dweller
2025-08-26 12:38:01
Benchmark is hands down the best value for consumables! A 50 pack costs the same as 5 from a big box store.Professional welder/fabricators dream. They cut well, last just as long as any other disc! Have yet to have one blow up and have run thousands of them to a nub. Even got a shop i previously worked at to make the switch.. DO IT!
M. Joy
2025-08-09 10:22:28
Thesr wheels are unrivaled. They are priced cheap and out perform all mame brand counterparts.I used one to cut steel angle stock, bolts, and other hard metals. They cut a nice thin line that leaves a surgical appearance that looks clean and neat. I removed a section from the rear angle of my utility trailer so I could re-deck the wood. The removed sevtion was easily fitted to weld back into place afterward - and after the weld was ground smooth and painted - the seams were undetectable. The 25 pack is a great bulk purchase and will last a very long time. I recommend these over all others.
Mother of 1
2025-07-07 15:14:59
These have to be some of the best cutting disc's I have used in my 24+ years of welding! I had to fabricate tow hook rings for my 4x4 last week and I was able to cut 11'' of 1/2'' steel plate and 8'' of 1/4'' flat steel bar and was able to with one disc. These disc cut smooth and quick! Normally while cutting 1/2'' plate the disc will over heat and start to cut very slowly but these cutting disc when threw the plate quick and easy. They cut better then the 5 dollar disc at the welding supply shop and last way longer then the Harbor Freight disc's by a long shot. It cuts threw 1/8'' cold roll plat like its nothing with very minimal wear. If you use a lot of these every year like I do I highly recommend them for there price and quality.
Marvin
2025-06-25 15:50:44
I have purchased these several times and will continue to use them. They cut fast and hold up well. I have only used on carbon steel so not sure how they would last on stainless or non-ferrous metals.
Tye. Morris
2025-03-26 12:00:40
Disks didn't last as long as the more expensive ones I have had.
Lora
2025-03-25 13:19:10
Works well
Matthew Walker
2025-01-31 12:24:34
Best discs. Can use a single disc for prob 50 feet of 1/8-in cuts, if not more. Just take it slow - don't try to lean into the cut too much - and you'll cut straight and keep a single disc for a LONG time.
Robert Otwell
2024-12-19 10:31:34
I use several hundred of these a year in my shop. Pricepoint and quality are spot on.
Recommended Products
$11.21
$ 4 .99 $4.99