Your cart is empty.
Your cart is empty.Product Description
Heavy & Sturdy Machine
Features a 7 inch swing over bed, 13.78 inch distance between centers and 21mm spindle bore. Includes a thread range of 12-52 TPI, threading dial indicator and standard and metric handwheel graduations.
Infinitely Variable Speeds
Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The feed speed can be adjusted according to the requirements of different workpieces.
High Accuracy Chuck
3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.
Four-way Tool Post
T-slotted compound slide with four-way tool post, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.
Professional Cross Slide
Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78"). A lamp is for acurate operation in a dark environment.
Wide Applications
Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed.
Specifications
- Power of Motor: 550W DC Single Phase
- Variable Speed: 50-2500PRM
- Swing Over Bed: 180mm(7.09")
- Chuck Diameter: 100mm(3.94")
- Centers Distance: 350mm(13.78")
- Spindle Bore: 21mm(0.83")
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Net Weight: 40kg(88.18 lb)
Package Content
- 1 x Mini Metal Lathe
- Some Related Accessories
- 1 x Manual
7" X 14" Variable-speed Metal Lathe With A Movable Lamp
The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 50-2500RPM spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you.
- Sturdy Iron Construction
- Infinitely Variable Speeds
- Accurate 3-jaw Chuck
- Professional Compound Rest
Earl Stahler
2025-08-15 17:44:21
The only complaint would be the lack of a manual. I had a similar machine before so it was not a problem.I was not aware of it being a metric machine.
Jon
2025-08-12 10:12:22
Much better product than we expected for this price!
Wayne Metcalf
2025-08-10 10:42:43
It seems to work good, the plastic chuck guard was broken , and there was no lamp like the picture showed. Otherwise I'm happy with it.
Gary
2025-06-24 17:04:26
A bit small but nice tight tolerance even if it was broken and missing partsAbout .001 inch out after setting it up not too shabbyGarage wheel was cracked when I opened crate (that had a hole in corner and not all of the change gears arrived with lathe)But like any true machinist not gonna send back angsiety too high to wait a month for issues to be resolvedAll in all not bad
bobby Mcrae
2025-05-26 20:27:32
Well , it came in early…. That’s about as much of a compliment I’m going to give. The center is far from center. Handles we broken (okay I’m a machinist no problem) went to mount the lathe to the table and there were two broken off taps in both the back leg support cast. Gears shift is terrible. Low rpm is not concentric with vibration so I wouldn’t recommend any speed less than max (probably cheap bearings) . The dead man stock is very difficult to use because the nut hangs on every center cast support so somebody didn’t do their math correctly…..Yes I’m going to keep it and make my own parts to improve it but it’s pretty terrible value for the money..
Frederick Brock
2025-05-24 20:57:26
I bought this as my first lathe. These machines, no matter which brand, are a little finicky and require tuning to get working properly. I gave this purchase a 5 star because I had an issue with the lathe that was sent and the vendor responded to me promptly and went above and beyond to take care of me. Thank you so much!!! I will buy from this vendor again. The lathe is accurately represented. If you are new to lathe work, take the time to clean and tune the machine before you start, take the control panel cover off and add a small piece of plastic or protection over the control board to ensure no metal shavings hit the control board, tighten the gibs and mount the machine to a table.
Michael Bates
2025-05-05 18:44:28
i really like this lathe and it’s a great starter lathe that has a lot of accuracy!
Brent Burris
2025-04-04 13:15:38
Very good garage machine. I use mine to make motorcycle parts and other little jobs just recently used it to turn down a set of race car shock mounts it dose an excellent job. You have to center up the tail stock check all screws and bolts and set the cross slide tension. I recommend adding a live center, drill chuck, quick change tool post and good quality tooling.
G
2025-01-12 17:26:47
Muy buen producto. Cumple con las espectativas.
Recommended Products
$34.99
$ 14 .99 $14.99