Your cart is empty.
Your cart is empty.BESTORQ HTD timing belts are the third generation of high capacity industrial timing belts. They offer a reliable, economical and trouble-free alternative to chain drives. Compared to chain drives BESTORQ HTD timing belts are cleaner, lube-free, quieter and lower in cost. BESTORQ HTD timing belts offer increased performance over generation 1 & 2 fiberglass cord, timing belts. They feature an engineered HTD-type tooth profile, engineered to perform well in the common three industry standard pulley tooth profiles, HTD, Gates PowerGrip GT2 pulleys and RPP. Note: They will give slightly lower life in RPP pulleys. The belts feature high temperature chloroprene polymer throughout. The high performance, woven, nylon based, fabric facing material has been engineered and tested for highly wear resistant performance. The backing is precision ground for smooth uniform running. The helically wound tensile cords are specially engineered, twisted and chemically set stranded fiberglass material. Lab and Field Testing has proven that BESTORQ is superior or equivalent to other 3MM, 5MM, 8MM, 14MM, and 20MM “HTD-Type” premium brand industrial timing belts. The BESTORQ HTD timing belts exceed USA RMA Standard IP-27 ratings levels and compare to the premium manufacturers ratings for 3MM, 5MM, 8MM, 14MM, and 20MM standard timing belt horsepower rating levels
eihei dogen
2025-09-03 17:59:31
High quality belt
Gabriel P.
2025-08-26 11:07:25
It's a timing belt. It fits the vacuum cleaner as advertised. Vacuum cleaner brush roller now rotates.For those who have never made this repair, on the Shark model this was used for, there are 10 screws on the bottom of the vacuum roller housing that need to be removed to access the motor and belt. When removing screws, place screws on flat surface in a pattern similar to their housing location so you can remember where they were originally.Flip vacuum over and rest on the floor or table sideways. Fold roller housing out flat. Remove screws with standard phillips head. Four near the base, three in the center, three in the front. Two in front are hiding underneath the wheels.Flip vacuum over while holding housing closed. Gently allow housing to fold open. Motor and belt are on the side. Motor is simply press fit into a notch. Lift motor out of notch to loosen old belt (if its not already broken. Replace belt around motor and roller and then fit motor back into notch.Gently close housing, making sure electrical wiring is clear of any pinching or crushing.Flip vacuum back over while holding housing closed, and replace all screws in reverse order.
Owner
2025-08-13 10:18:08
This worked for my BISSELL DeepClean Premier Pet Carpet Cleaner 17N4. The original belt (marked 3M-189-6) failed after only nine months, but it did get a decent amount of use. I gave this belt four stars because I found the cost a little high. I would have shopped around a bit more but time was running out if I wanted it next day. Though I feel it was a little more costly than it should be, I am glad it worked with no issues. I will update this post if this belt fails prematurely.
jose ramirez
2025-07-29 14:15:17
Very good product 👌
Fussy Systems Engineer
2025-07-26 15:29:49
This is a perfect fit for its intended application (replacing the shorter belt in a Bissell Lift Off carpet steamer). It appears to be more robust than the original OEM part.
Miranda
2025-07-04 14:03:07
Perfect fit thank you.
Customer
2025-06-29 14:01:01
Belt already wore out
CHRIS MORROW
2025-06-22 13:44:39
This belt is a direct replacement for the Original timing belt and works perfectly for my Shark Rocket Deluxe Pro. No issues at all.But consider this advice that would've been nice to know ahead of time. If your vacuum has warranty as mine did, don't open it up and fix it yourself. Shark would've sent a brand new head unit for free. Well... I voided the warranty by opening it up and then fixed it myself.
eihei dogen
2025-05-30 12:55:42
High quality belt
Gabriel P.
2025-04-19 19:52:28
It's a timing belt. It fits the vacuum cleaner as advertised. Vacuum cleaner brush roller now rotates.For those who have never made this repair, on the Shark model this was used for, there are 10 screws on the bottom of the vacuum roller housing that need to be removed to access the motor and belt. When removing screws, place screws on flat surface in a pattern similar to their housing location so you can remember where they were originally.Flip vacuum over and rest on the floor or table sideways. Fold roller housing out flat. Remove screws with standard phillips head. Four near the base, three in the center, three in the front. Two in front are hiding underneath the wheels.Flip vacuum over while holding housing closed. Gently allow housing to fold open. Motor and belt are on the side. Motor is simply press fit into a notch. Lift motor out of notch to loosen old belt (if its not already broken. Replace belt around motor and roller and then fit motor back into notch.Gently close housing, making sure electrical wiring is clear of any pinching or crushing.Flip vacuum back over while holding housing closed, and replace all screws in reverse order.
Owner
2025-04-07 15:39:24
This worked for my BISSELL DeepClean Premier Pet Carpet Cleaner 17N4. The original belt (marked 3M-189-6) failed after only nine months, but it did get a decent amount of use. I gave this belt four stars because I found the cost a little high. I would have shopped around a bit more but time was running out if I wanted it next day. Though I feel it was a little more costly than it should be, I am glad it worked with no issues. I will update this post if this belt fails prematurely.
jose ramirez
2025-04-04 17:13:19
Very good product 👌
Fussy Systems Engineer
2025-03-27 13:54:36
This is a perfect fit for its intended application (replacing the shorter belt in a Bissell Lift Off carpet steamer). It appears to be more robust than the original OEM part.
Miranda
2025-03-17 12:05:34
Perfect fit thank you.
Customer
2025-03-13 14:39:35
Belt already wore out
CHRIS MORROW
2025-03-05 17:59:49
This belt is a direct replacement for the Original timing belt and works perfectly for my Shark Rocket Deluxe Pro. No issues at all.But consider this advice that would've been nice to know ahead of time. If your vacuum has warranty as mine did, don't open it up and fix it yourself. Shark would've sent a brand new head unit for free. Well... I voided the warranty by opening it up and then fixed it myself.
The Band: RARITY
2025-02-23 15:54:51
For Dirt Devil Cordless Vacuum.
J Anne
2025-02-19 20:29:33
Perfect
Val Turgeon
2025-02-18 21:26:58
Great product
The Band: RARITY
2025-01-12 11:59:06
For Dirt Devil Cordless Vacuum.
J Anne
2025-01-07 16:09:04
Perfect
Val Turgeon
2024-12-21 18:06:46
Great product
Recommended Products
