Your cart is empty.
Your cart is empty. ExpressLRS Nano TX Module supports 500Hz refresh rate； Short press the button on the Nano module 3 times to get into the binding status. We suggest our customers upgrade their modules and receivers' ELRS version to 1.0.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Note: The firmware version of the Nano receiver and module manufactured by our company is ELRS 1.0.0-RC5 (the fifth test version before release); The ELRS Innovative team has officially released version 1.0.0. Based on the version, we have some updates:
Specification
● Weight: 0.7g (receiver only)
● Size: 12mm*19mm
● Telemetry power: 20dbm
● Frequency bands (Nano receiver 915M/868M version): 915M FCC/868M EU
● Input voltage: 5V
● Antenna connector: IPEX MHF
Package
● 1 * BETAFPV ELRS Nano receiver
● 1 * BETAFPV T antenna
● 2 * Spare shrink tube
● 4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
● 1 * pin header 1x4
● 1 * Nano receiver user manual
John Dewey Hamlet II
2025-08-22 13:33:36
it goes forever
Customer
2025-08-11 12:16:09
no problems pairing. It is important to follow the directions very carefully, plug and unplug three times and watch the light. When it gets into the pairing mode it will then pair with the transmitter. I also found it is much better to turn on the transmitter first when powering up. used in a quad copter and connected to ardupilot via a serial port on the fc. best to either pair on the bench before installing or have a separate connector on the receiver to facilitate plugging and unplugging. very satisfied with this product.
Thomas J. Coyle III
2025-07-17 11:16:07
This Nano Receiver performed as expected right out of the box.The header pins were easy to solder to the receiver pwb and it went into the binding and the WIFI modes as expected.A very worthwhile investment for RC work.
Paul
2025-07-12 17:30:05
Great product that is small and works well with the latest technology and I'm excited to be using it for the 1st time. I can tell already that it works very well. Operated in my drone with my new TX16S MAX And it programs in and worked so well was so smooth and glitch free I love it.
daddyurbs
2025-06-23 12:34:41
If you don't know how to get this to pair with your radio. Scroll over to you tube, there are plenty of videos to guide you 😀 Open tx rocks!!
Chris Winter
2025-05-16 10:05:54
The protocol is excellent, but betafpv doesn't have anything to do with that. The receiver was ok. It worked no problem, but only lasted like 2 months before the ufl connection part separated from the board, which I don't know how to fix and probably isn't worth fixing anyway. Much cheaper to get somewhere else (I think the last elrs rx's I got were like $13).
Diego Ospina
2025-05-07 09:51:16
Tuve algún inconveniente a la hora de actualizar con la app de escritorio pero con la versión web pude solucionar, gran rendimiento, el único inconveniente es la antena que me parece que está muy corta, de resto perfecto hasta el momento
Eric Warren
2025-05-06 14:09:38
There are other brands out there, but the BetaFPV one is the only brand that survives on my workbench. The others break too easily, and some don't have status LED's but this one does.
Jacques AUBERT
2025-04-15 11:08:01
Monté sur gros quad, super matériel, livré avec firmware version 3.3.0 FCC, compatible avec capteurs télémétrie F722 firware INAV
Andrea Fares
2025-03-14 10:10:22
Preso per sostituire ricevente su un iflight nazgul 5. Tutto ok. Aggiornamento senza problemi seguendo le istruzioni del sito ufficiale expresslrs . Forse l'antenna è un po' più piccolina delle classiche immortal t ma non è importante. Segnale sempre senza problemi anche là dove con frsky avevo fail safe random
roger kies
2025-03-01 12:25:53
Super keine Probleme damit gehabt.
Shayan03
2025-01-25 11:51:51
I received a dead board which didn’t light up or make any connections after connecting to the FC. I was using a smokestopper and the soldering looked perfect so the board must’ve been dead upon arrival. I have started a return, but I’m not so optimistic about how it’s going to play out. I will update this review once the return has been processed.
Cliente
2025-01-13 13:34:39
Buen receptor y muy rápido el envio
Recommended Products
$14.99
$ 6 .99 $6.99
$39.95
$ 18 .99 $18.99