Your cart is empty.
Your cart is empty.Product Description
Oak Leaf Superior Quality Stainless Steel Beverage Dispenser Replacement Spigot
Oak Leaf Beverage Dispenser Spigot is designed to replace those easy-to-break and leaky plastic spigots on the market. Our spigots look decent, feel solid, and last a long time, perfect for Beverage Dispensers.
Solid Beverage Replacement Spigot for Water, Cold Beverages, Juices, etc.
Specification:
- Material: 304 Stainless steel
- Thread Pitch: 1.25MM/0.05inch
- Size: as the picture shows
- Color: Silver
Quick Assembly
Package included: A stainless steel replacement spigot. 2 metal washers. 2 rubber bumpers and 1 nut.
-Please wash your hands before installing the stainless steel spigot.
-As shown in the picture, are the steps of installing the Oak Leaf faucet.
Note: After installing into the drink dispenser, please kindly test for leaks before normal use.
Perfect for Any Beverage Service Occasions
E-Monster
September 2, 2025
I’m extremely impressed with the quality of this spigot, especially for the price! I bought it as a replacement for the original plastic spigot on my ZeroWater glass dispenser, which felt cheap and had constant leaking issues.From the moment I received this spigot, I could tell it was a significant upgrade. The weight and feel of it scream durability, and the handle operates smooth as butter. It fit perfectly on my dispenser with no hassle, and best of all—no leaks or drips!This is hands down the best upgrade for anyone dealing with flimsy plastic spigots. Absolutely worth every penny, and I’d recommend it 100% to anyone looking for a quality replacement!
Fred Maynard
September 1, 2025
This is a way better replacement spigot for the, "pH Recharge Glass Alkaline Water Dispenser" from the Invigorated Water Company! I used the spigots that came with the dispenser but they didn't last that long since they were made of plastic. I have this stainless steel Oak Leaf Spigot installed and the dispenser works great! The spigot was very easy to install in minutes! The spigot is made of high quality steel that hopefully will last a very long time. I will update later if needed.
CJD53
August 21, 2025
Delivery and package no problem. Compared to the original plastic spigot this one is nice and shiny and "heavy". Used small bottle brush and dish soap to clean best I could. Seems to be made well and feels like an upgrade. Fit our Big Berkey with no problem. Needed a crescent wrench to tighten inside nut during install. Stamped sheet metal washers supplied are sharp enough to cut you as others have noted so be careful. Lever action is smooth and easy, 90 degrees range of motion. Original spigot had become stiffer with age and was 180 degrees. Took me a day to become used to the difference. The flow rate is double what I am used to and that is great. No more dripping spigot. So far (1-2 weeks, daily use) this is easy 5 stars.
L. Powell
August 16, 2025
The media could not be loaded.
E-Monster
July 25, 2025
I’m extremely impressed with the quality of this spigot, especially for the price! I bought it as a replacement for the original plastic spigot on my ZeroWater glass dispenser, which felt cheap and had constant leaking issues.From the moment I received this spigot, I could tell it was a significant upgrade. The weight and feel of it scream durability, and the handle operates smooth as butter. It fit perfectly on my dispenser with no hassle, and best of all—no leaks or drips!This is hands down the best upgrade for anyone dealing with flimsy plastic spigots. Absolutely worth every penny, and I’d recommend it 100% to anyone looking for a quality replacement!
Fred Maynard
July 23, 2025
This is a way better replacement spigot for the, "pH Recharge Glass Alkaline Water Dispenser" from the Invigorated Water Company! I used the spigots that came with the dispenser but they didn't last that long since they were made of plastic. I have this stainless steel Oak Leaf Spigot installed and the dispenser works great! The spigot was very easy to install in minutes! The spigot is made of high quality steel that hopefully will last a very long time. I will update later if needed.
CJD53
July 18, 2025
Delivery and package no problem. Compared to the original plastic spigot this one is nice and shiny and "heavy". Used small bottle brush and dish soap to clean best I could. Seems to be made well and feels like an upgrade. Fit our Big Berkey with no problem. Needed a crescent wrench to tighten inside nut during install. Stamped sheet metal washers supplied are sharp enough to cut you as others have noted so be careful. Lever action is smooth and easy, 90 degrees range of motion. Original spigot had become stiffer with age and was 180 degrees. Took me a day to become used to the difference. The flow rate is double what I am used to and that is great. No more dripping spigot. So far (1-2 weeks, daily use) this is easy 5 stars.
L. Powell
July 16, 2025
The media could not be loaded.
kkcowgirl
July 9, 2025
I was given an old 2 gallon glass beverage dispenser that had been sitting in a barn for years, unused because it leaked. It was going to taken off to the dump. But it was a beautiful old dispenser, just had a cheap plastic spigot that I was told leaked.I needed another jar to do continuous brew kombucha at home, and when it was offered to me, I took it! I had already purchased this particular spigot for another, newer, dispenser that I had, and it worked fine. So I purchased again to try to salvage the old dispenser.And what do you know! It worked! Dispenser cleaned up well after its years in the barn, and with the new spigot, works like new! Now happily brewing another kombucha batch, and everything is holding up well. And no leaks!
Sani Bella
June 19, 2025
I washed the h-e-double-hockey-sticks out of this thing with Dawn platinum and rinsed it heartily and repeatedly when I got it for use with my glass zerowater brand filter tank/water dispenser thing. I still got a taste of nastiness in the first few glasses, basically the whole first tank of water. If I get one of these again I am running like a few gallons through it before drinking from it after washing it. It works well though, pretty sturdy, has a really basic ball valve so it makes the stream go all wonky and kinda twist if you don't open it all the way, which can cause spills, and the flow isn't very laminar, but it flows fast and can fill up a kettle quickly so that's good. I do not like how there is some flex up and down when twisting the handle open, I can see that maybe being a weak point. TBQH your beverage dispenser will probably break before this spout does. It's quite hardy.
Brook B
June 17, 2025
I purchased this to update an older faucet. Extremely easy to install and works excellent. Water flows perfectly.
Julio César Romero Prado
June 15, 2025
Llegò antes de lo anunciado y me sirviò para hacer unos dispensadores que necesitaba para una area especifica de una planta industrial.
Erick David Llamas Muñoz
June 9, 2025
Buena calidad en los materiales, buen diseño en el flujo de agua
Juan
June 6, 2025
Excelente llave para despachador, maciza, acero inoxidable, mide 8 cm aproximadamente
DianaC- retired IAgardener
May 31, 2025
Me gusta mucho. Son fuertes y muy resistentes.
Edwing
May 20, 2025
Funciona muy bien y es estética
kkcowgirl
April 19, 2025
I was given an old 2 gallon glass beverage dispenser that had been sitting in a barn for years, unused because it leaked. It was going to taken off to the dump. But it was a beautiful old dispenser, just had a cheap plastic spigot that I was told leaked.I needed another jar to do continuous brew kombucha at home, and when it was offered to me, I took it! I had already purchased this particular spigot for another, newer, dispenser that I had, and it worked fine. So I purchased again to try to salvage the old dispenser.And what do you know! It worked! Dispenser cleaned up well after its years in the barn, and with the new spigot, works like new! Now happily brewing another kombucha batch, and everything is holding up well. And no leaks!
Sani Bella
April 17, 2025
I washed the h-e-double-hockey-sticks out of this thing with Dawn platinum and rinsed it heartily and repeatedly when I got it for use with my glass zerowater brand filter tank/water dispenser thing. I still got a taste of nastiness in the first few glasses, basically the whole first tank of water. If I get one of these again I am running like a few gallons through it before drinking from it after washing it. It works well though, pretty sturdy, has a really basic ball valve so it makes the stream go all wonky and kinda twist if you don't open it all the way, which can cause spills, and the flow isn't very laminar, but it flows fast and can fill up a kettle quickly so that's good. I do not like how there is some flex up and down when twisting the handle open, I can see that maybe being a weak point. TBQH your beverage dispenser will probably break before this spout does. It's quite hardy.
Brook B
March 16, 2025
I purchased this to update an older faucet. Extremely easy to install and works excellent. Water flows perfectly.
Julio César Romero Prado
March 14, 2025
Llegò antes de lo anunciado y me sirviò para hacer unos dispensadores que necesitaba para una area especifica de una planta industrial.
Erick David Llamas Muñoz
March 7, 2025
Buena calidad en los materiales, buen diseño en el flujo de agua
Juan
February 17, 2025
Excelente llave para despachador, maciza, acero inoxidable, mide 8 cm aproximadamente
DianaC- retired IAgardener
February 16, 2025
Me gusta mucho. Son fuertes y muy resistentes.
Edwing
February 5, 2025
Funciona muy bien y es estética
Recommended Products