Your cart is empty.
Your cart is empty.
Specification:
Material: Iron
Weight: 255g / 8.99oz
Color：black
1. Made of Iron, durable and practical for most bikes, partial plastic
2. Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel.
3. Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3"
4. Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 19cm / 7.48"
5. Usually the axels fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike
6. Fit for: Road Bike, Mountain Bike, MTB, BMX
7.You can use it to repair your mountain bike quickly. Perfect for cycling lovers, your best choice.
Package Include:
1 * Short Hollow Shaft
1 * Short Quick Release
1 * Long Hollow Shaft
1 * Long Quick Release
Samuel Tseng
2025-09-03 12:47:17
Bought these to convert the front wheel of my e-scooter (Hiboy VE1 Pro) to have a quick release so I could easily store it in the back of my car. Installation was easy. The scooter had sealed bearings, so some parts were not needed. The axle slipped in nicely.One caveat was that the scooters spacings were slightly different than a bike's so you'll need to buy some washers and mess around with the spacings to get the stock disk brakes to play nicely, but overall not too bad.Would prefer it to be ~1 mm longer, but then again the scooter is not quite standard (compared to bikes) and it is still usable. No comment on durability for now, but no problems after 2 miles on rough countryside roads.No comment on the longer rear axle since I was not planning on changing the rear wheel.
Tan Vu
2025-08-15 13:50:14
Just what I was looking for. Quick release on my bicycle wheels
Todd Morency
2025-08-14 12:41:28
These adjustable hub clips were the best for the money and ship fast. No complaints
PGareis
2025-08-08 10:49:57
This is a very good product to convert a Mountain bike from Bolt-On standard axles to Quick Release axles. I used it for my Huffy MOUNTAIN 27.5" Rangeline bike that comes with 3/8" diameter bolts with NF threads.The front forks come standard in Steel and need accurate Quick Release bolts for the front (since the bolt rest point is not very wide). The Front Bolt in the kit was just about a millimeter too wide and was easy to file down to the perfect width. The Rear Bolt was perfect width. Not sure about the strength of the bolts but I do not plan on aggressive trail riding -- mainly will be going on paved bike trails and some gentle dirt trails. The skewers were perfect length and worked fine for me.
Techster
2025-08-05 14:28:38
Recently got a new bike to replace my 30-year-old workhorse bike.Used this to replace a fixed axle with a quick-release axle on my new bike.The axle snapped in half in less than a year's use.Made it home after a long ride but was worried.My 30-year-old bike's quick-release axles are still rock solid.Do not buy!
Jared M
2025-08-04 13:05:41
I found this to be to spec, unfortunately my bearings are a different style. I went to remove the bearing mounts and realized that amidst the oily bearings that my fingers were being shredded to the point of bleeding, and when I went to remove the plastic cap opposite the lever, that it bent out of shape, and got stuck on the nut.I didn't ask for a refund because I used the new levers and threaded bars, using the old bearing mount and caps.
Pacman
2025-07-20 13:58:23
I was surprised they arrived undamaged, even the dust covers, because it had a flimsy padded envelope, nothing else, not a quick rap of bubble wrap to prevent the inevitable.Anyway, what a great little set. Not only did the work "perfectly", they also saved me further fork damage and perhaps injury.I couldn't get the front wheel to seat straight and lock down properly (and safely) after two tries I realized my forks had to be bent, and sure enough, the right fork had a slight kick back, but noticeable once you see it.So, they were easy to install and fit perfectly. I can't wait to fix my fork and get some miles on them and see how they survive. 10/10
T. Dempsey
2025-06-23 11:26:47
I was recently given an indoor bike trainer. my bike only needed the right skewer to fit that stand. my SO's bike though would've needed a replacement wheel at (using VERY round numbers here) $50-100 for the upgrade. the swap wasn't too bad to do really and I rated the "easy to install" down one star based on some headache regarding the axle length. this could have been my own fault by not measuring properly. in any case, it did work. no instructions or paperwork were included and I would base this on a typical bike repair shop purchasing this for the same purpose versus.... me. the kit did work as expected with the sole issue being the axle length came up about 5MM too long. I'll need to do some creative trimming to make it proper. also, there was one more thing. the included dust shields for the bearings were preinstalled and one had a bit of a bend in it. not really a big issue for me.
The item was damaged its look like use not new
2025-06-08 16:06:30
Damage item not recommended
Primitivo
2025-05-31 11:09:18
Funcionó bien al principio pero se dobló, no soy una persona delgada asà que quizá funcione bien para menos de 100kg.
NMD
2025-04-26 14:43:09
Purchased these Axle's of Amazon.Product is well designed, due to harsh riding the rear axle broke and had to switch to a hard axle, its been alright.
Jesus carrasco
2025-01-04 15:28:46
Recomendable
Kristin Reid
2024-12-23 10:05:27
Absolutely terrible. Product arrived damaged in a few places, rendering the product unusable. Don't waste your time.
Recommended Products
