Shopping Cart

Your cart is empty.

Your cart is empty.

Bilstein 24-158848 Monotube Steering Damper, Front 46mm,Silver

Free shipping on orders over $29.99

$97.86

$ 40 .99 $40.99

In Stock

1.Style:Modern


About this item

  • Country of origin : United States
  • Package Dimensions : 26.56" L x 3.09" W x 2.96" H
  • Package weight : 4.63 pounds
  • Model number : 24-158848


Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.Self-adjusting deflecting disc valving


Rhianon Redmond
2025-08-17 11:10:39
It's and looks great, much heaving duty and better performing than original, I can feel the difference, great product!
Katelyn
2025-08-10 14:47:12
Super easy to install. Comes with instructions including what length your bracket has to be at for it to fit appropriately. Stock bracket is required. Be SURE to measure from the right spot! I have attached a picture. In the instructions I don't think the picture is quite clear enough and it may seem like you measure from the dimple closest to the passenger tire. Don't do that. Measure from where my picture shows. If you install and are getting popping noises when turning your measurement for the bracket is off. I made the mistake so you don't have to!My clevis was bent and wouldn't allow the new stabalizer to even begin to seat in there. Pair of vice grips and a really big bar allowed me to open the clevis up enough to get the new stabalizer end in there. Picture attached with how I did that if you happen to run into the same issue.
Fbell
2025-07-03 16:42:41
Installed this on my 2003 F250 FX4. Bolted right up to the stock mounting location. The only issue I had was my truck didn’t have a factory steering damper or the previous owner took it off, so I had to buy a bolt for the eyelet end. No big deal though, quick measurement for bolt length and short trip to the hardware store. Definitely tightened up the steering a lot! Didn’t really notice a pull to the left like every one else talks about. I still notice a slight bump steer on bigger bumps but I also have 35” tires so I would be better off getting the dual steering setup. Figured I’d try this first being that it’s cheaper than the dual setup. It definitely still works though and looks good!
seth
2025-06-17 11:54:46
Great product, I purchased for my 02 ford f250 superduty back in september, I was using a lesser brand shock prior to this, after the stem seal blew on the original shock I replaced with said lesser brand, i'm not sure what it was about my shock but i got less than 2 weeks service from the shock before the stem seal blew, it was at that point i decided to come off my wallet and buy the Bilstein shock, it was much more expensive than the other brand but it didn't take me long to realize why, the driving experience is much smoother, and it's now January, It's been in service since september, not a sign of a leak yet and still performing great, by far outshining my 60 dollar 2 week service period shock I had before, do yourself a favor and spend the money now, rather than wasting 60 bucks on junk and wind up buying this anyway in the end.
Walter Brown
2025-05-23 12:19:23
Big improvement in the steering on my F-350 Super Duty. Old one was worn out.
g ramsay
2025-04-07 13:06:08
Does Not fit 2000 F-250 super duty xlt 4wd,I currently have a stock setup and tires on my truck and there wasnt enough movement in this stabilizer to accomodate the stock setup. (even though this is what the bilstein website calls out). The quality looked nice but I dont want a steering damper to be the limiting factor in my turn radius.
Mike T.
2025-03-16 18:58:09
My steering stabilizer had over 200,000 miles on it and I had no idea how bad it had become. The Bilstein stabilizer is a beast in construction and stiffness. Next, the entire installation took about 15 minutes and that included getting an adult beverage from the fridge. With that said, I had rebuilt the entire front end a month ago so the stock stabilizer had been removed and reinstalled once already.
Tiffany Roose
2025-01-25 18:15:26
Really made a big difference on my Excursion. Tracks straight like never before.I saw a number of reviews complaining about the stabilizer pushing the steering to the left.I did not experience that issue at all. This part is really effective I’m glad I purchased it.
Recommended Products

$177.99

$ 79 .99 $79.99

4.4
Select Option

$129.95

$ 53 .99 $53.99

5.0
Select Option

$59.95

$ 27 .99 $27.99

4.4
Select Option

$34.95

$ 16 .99 $16.99

4.6
Select Option

$37.74

$ 17 .99 $17.99

4.8
Select Option

$42.78

$ 19 .99 $19.99

4.9
Select Option