Your cart is empty.
Your cart is empty.BleedZone Kit for Zoom Hydraulic Brakes. Includes the essentials to bleed your brakes. One-Year Limited Warranty (see seller profile for more details). Feel free to reach out if you have any questions, comments, or concerns! BleedZone is dedicated to providing the highest quality bleed kits with exceptional customer service! Visit our store to find other bleed kits for Shimano, Avid, Formula, Tektro, and Magura hydraulic disc brakes along with bleed kits for RockShox suspension components: www.amazon.com/shops/bleedzone.
Steven K.
2025-08-20 11:30:58
I recently encountered an issue with the front hydraulic brake on my electric scooter—there was zero pressure after pulling it out of storage for the winter. After some research, I determined that air had likely entered the hydraulic brake line. This kit proved to be the perfect solution.Despite my lack of experience with bleeding hydraulic lines, I found the process straightforward thanks to the online tutorials and included equipment. The kit came with all the necessary attachments and tools for various scooter/bike fill ports, making it easy to get my scooter back in working order. Watching a tutorial online helped, and within 10 minutes, I successfully bled the front brake line.The kit also included more fluid than needed, ensuring that I have enough for future maintenance. While detaching the filling equipment from the bleed port did get a bit messy, the overall process was smooth and effective. My brake feel is now back to its original performance.If you’re dealing with air in your hydraulic brake system and are looking for a reliable, user-friendly solution, this kit is highly recommended.
mgforshort
2025-08-01 17:22:36
There are no instructions, but there are plenty on YouTube. I'm using this on our Lectric XPremium ebike.You get 2 syringes and 4 different size plastic hose attachments. Remove the bleed port screw on the top of the brake lever with a torx bit and screw in the thickest ( 5.8 mm) plastic attachment. It has a metal thread at one end. Don't tighten it much. Fill the syringe ( apply suction with another tube attached or the one to be used) 1/3 rd with the included mineral oil and attach (push it in) to the other end of the plastic tube. Hold the syringe upwards. Start pumping the brake lever and watch the air bubbles rise and dissolve in the syringe. For faster result occasionally pull on the handle of the syringe ( apply suction ).The worst mistake you could do is to drop the bleed port screw with that special O ring. Use a soft towel to arrange all parts and prevent them rolling away. The only tool needed is the torx bit and paper towel.
snowman
2025-07-19 19:28:52
Can bleed out a brake line fast. No problem. Just wear gloves as the brake fluid is caustic.
salmongirl
2025-06-18 14:41:36
Works great got my brakes bled no problem
Mitch snyder
2025-02-08 14:47:29
No instructions but watched YouTube video and was simple and easy to bleed my rear brake on adventon adventure E bike .Took about 15 minutes.
Jordan S.
2024-12-31 15:24:50
Works as expected for a "quick & dirty" bleed from the top! For some reason I thought it came with the Torx bit required to open the bleed valve, but it doesn't. It also doesn't say that it comes with that so all good! I was able to open the bleed valve with a hex wrench/Allen key, but actually having the correct driver would make things easier. Comes with everything else you need! I would recommend a soft paper towel to hold the little screws (and their o-rings) while you work, and using a paper towel to catch drops when you detach the syringe is also beneficial.
Chris Barry
2024-12-25 18:20:34
The most important thing, instructions, were completely left out of this package.
Rocky
2024-12-20 14:34:35
I like this product a lot. I have a Kaabo Mantis king GT and it took me less than a minute to bleed brake lever. Better now than when I got it from factory.
Lawrencerioux@Hotmail.
2024-12-10 18:29:01
Excellent produit
Sterngucker
2024-12-03 18:29:16
Es war alles vorhanden, was man braucht.Dank einiger YouTube-Videos, die ich gesehen hatte, funktionierte die Entlüftung und das Nachfüllen mit dem Hydrauliköl problemlos. Eine Ursache für den Druckabfall hatte ich zuvor nicht gefunden. Der Druck ist jetzt schon mehrere Wochen stabil.
Recommended Products
