Your cart is empty.
Your cart is empty.Product Description
Bnell floor transition strips are available in various sizes, 3mm, 5mm, 10mm, 15mm, 20mm. Suitable for your various tiles, wood floors, vinyl floors, etc..The floor edging trim strip is beneficial to protect children or the elderly not to tripping.
Easy To Install
The products are made of high-grade PVC materials.And this floor edging trim come with super sticky self-adhesive tape.It can keep you sticky for a long time.
Widely Used
The transition strip is available in various edges, which is suitable for threshold transitions and edge trims between carpet and floor, carpet and floor tile, floor and floor tile.
20mm model size
The 20mm floor strip has a thickness of 23mm and a width of 73mm. The applicable transition height is within 20mm, and the transition height of the raised part on the floor is 3mm.
(If the height of the door from the ground is less than 3mm, then it will affect the opening and closing of the door.)
15mm model size
The 15mm floor strip has a thickness of 18mm and a width of 73mm. The applicable transition height is within 1 5mm, and the transition height of the raised part on the floor is 3mm.
(If the height of the door from the ground is less than 3mm, then it will affect the opening and closing of the door.)
10mm model size
Product Dimensions and Precautions
The 10mm floor transition strip has a thickness of 13mm and a width of 35mm. The applicable transition height is within 10mm, and the transition height of the raised part on the floor is 3mm.
It should be noted that when you use this floor strip as a threshold under the door, you need to measure the height of the door from the ground. If the height of the door from the ground is less than 3mm, then it will affect the opening and closing of the door.
5mm model size
The 5mm floor strip has a thickness of 8mm and a width of 37mm. The applicable transition height is within 5mm, and the transition height of the raised part on the floor is 2mm.
(If the height of the door from the ground is less than 2mm, then it will affect the opening and closing of the door.)
3mm model size
The 3mm floor strip has a thickness of 5mm and a width of 30mm. The applicable transition height is within 3mm, and the transition height of the raised part on the floor is 2mm.
(If the height of the door from the ground is less than 2mm, then it will affect the opening and closing of the door.)
Snoop
2025-08-13 20:14:52
My friend bought a house and thought the bedroom carpet needed to be replaced. The carpet itself was fine, but previous owners hadn't used any sort of transition, so at the doorways it looks scraggly and like it was ready to come up. Enter these very easy to install and inexpensive transitions and the flooring looks so so much better. Great product, so glad to have found it!
A.Day
2025-08-08 13:33:04
This isn’t the easiest size to find but it was exactly what we needed for 3/4 inch mats in our gym.
Love these very soft
2025-08-07 15:50:06
Would not buy again
Customer
2025-06-19 10:07:13
When my mother became unable to walk and needed a wheelchair full-time I thought we would need to rip out the thresholds in the rooms that she used. Thankfully this product was durable enough and so easy to install. It really made it difficult time easier to deal with.
Egerio
2025-05-03 15:51:05
My task was to replace a worn out end cap for a floating floor (sometimes called a saddle).The product was delivered coiled in a box, which even after being allowed to uncurl for 48 hours, was still deformed. That is, some of the thin end retained a slight curl.Other users have complained about the product's poor adhesion. Here's my workaround. As base I used duct tape to provide a removable bottom layer. I then peeled off the product's adhesion protection strip. Before putting the assembly together, I added a light coat of epoxy to supplement the adhesive strip.The result is an end cap which will provide a strong bond but doesn't harm the underlying floor.
Nick F.
2025-05-01 16:21:52
Fanastic solution for a transition I didn't well plan and could not find wood ones that might accomodate my 3/4 in transition in 2 door ways from tile to lvp. It does come rolled and maintain a shape so my heat gun was very helpful to soften it for fit. Easy to cut with a sharp utility knife. These has stayed stuck for over 6 months since installation. Great color for my purposes
KenL
2025-04-09 12:51:23
It has a very small profile and was not high enough for my floor.
#AskMissPatience
2025-04-07 17:43:06
Installed waterproof vintage style tile in the pet closet where their litter pans are. The issue for us is the ridge without stick. Clear caulk bead along the strip and wipes took care of waterproofing.Precut the trim so the non-stick edge extended inside each door side corner trim. Old house floor trim has a corner on each side in the closet. Back then the interior of a closet is as nice as the room.Using a spatula smoothed the caulk to a consistent amount. When stuck down pressed out the excess and ran a wipe while continuing to press as much as possible to close and seal the edge on the inside of the closet.Previously tried a strip of oak. This looks so much nicer and I feel confident the seal is waterproof.Very happy with this purchase. There’s enough for another door.My concern in a high traffic area is this would not work long term only having a two sided tape strip. For a closet or low traffic area would definitely repurchase.Hope the clear caulk tip is helpful along with the reviewâï¸âï¸âï¸âï¸âï¸ðŸ’¯
turboburst
2025-03-21 14:11:15
it is easy to install for sure, but it is not stable, two sides are so easy to lift up, I have to use glue. after a few minutes, it lift up again, I am going buy another Floor Transition Strip, wood or metal should be better.
Amanda
2025-01-09 10:44:30
Exactly what we needed to transition thick tile (for a wood-stove hearth) with vinyl flooring. No issue with adhesive.
Recommended Products
$22.30
$ 9 .99 $9.99