Your cart is empty.
Your cart is empty.The Pro Class jig has a quick-set magnetic clamp with larger grips for easy operation. Features simple off-set adjustment & accurate “snap” indexing. Don’t spend a mint to get perfectly fletched arrows! Choose Straight, Right or Left.
Sir daddy
2025-07-07 11:22:28
Blitzenburg jig but plastic is the only diff works great takes a lil trial and error but once u get it down it's great
Tony Huckabee
2025-07-05 18:36:26
Good quality and easy to setup!Used multiple times for different size fletchers on new and used shafts.I recommend this product!
Todd Gammons
2025-06-05 17:23:43
Cheap price but it works. Fletched several arrows now with no issues
Cullach
2025-05-17 16:42:29
I purchased this LW jig to place an old JoJan straight fletcher. I shoot full helical with my traditional stuff. I ordered an extra RW clamp separately. Very easy to use. The fletching process with this is pretty straight forward. If you're not a instruction reader, make sure you align the graduations on the back of the jig (the part that houses the magnet)to get your L or R helical correct. Once you do that, the fletching lines up great. Also, this worked fine on 2216 Easton XX75 Gamegetters if you're worried about arrow diameters larger than carbon.
Drew
2025-05-14 10:43:15
locating indent on inside of knob was flattened and broken before I even got to use the tool:/hopefully i can fletch a couple arrows before I have to toss the tool in the trash.
Customer
2025-05-05 18:37:15
Affordable and very versatile, you can really dial in the right amount of offset, just be checking knobs and make sure everything stays snug, it only takes a couple arrows to get dialed in.Tip: Buy some oracle 651 vinyl and make your own wraps its a lot easier removing vanes and experiment with different setups. Especially helpful for broadhead tuning.
Matt A.
2025-04-22 14:50:22
Decent low cost jig. I do not see why it would have any negatives - yes it is not a Bitz, but for the money, I could by 5 of these for 1 Bitz. It does a great job and is not difficult to set up (somewhat intuitive). It cleans up very well using acetone or Methel Ethyl Keytone (MEK), but I prefer acetone - honestly if you need to put a bunch of time into clean up, then you are probably using too much glue.I've fletched "fat" Carbon Express CXL's with it as well as Blue Streaks with equal results. I have only used Bohning Blazers or X2's with it, so I cannot speak to results with longer vanes, but the results are equal with either vane.
Scott H
2025-04-03 12:48:09
This fletching jig seems to work well for a clamp type jig. I have no complaints. It is nice that it has markings on it to tune in adjust fletching offset.
Emiliano Gutierrez
2025-02-25 17:33:08
Una herramienta totalmente indispensable si lo que se busca es hacer sus propias flechas, la utilización de esta emplumadora es muy sencilla y facilita el trabajo de emplumar las flechas, estoy totalmente satisfecho con esta compra
Boss
2025-02-24 14:52:48
Love this jig. I first got the Aae 3 fletching jig for like 12$ less, but was not happy because I couldn't adjust it and arrow tip kept lifting the jig if no pressure applied.So I got this jig and it is very adjustable, took me quite some time to get it perfectly adjusted to about a 3-4° right helical with 2 inch blazer vanes... I'm a perfectionist...Arrows sing through the air, very steady and even broadheads are flying true. Very nice beginner, budget jig.I always wipe the clamp every vane I glue and after finishing the arrow I gently scrape all the hardened glue off with a knife to keep it from getting all gunked up. Works well!
Garzas Outdoors
2025-01-12 09:52:07
CUMPLE CON TODAS LAS ESPECTATIVAS QUE YO ESPERABA CON GUSTO LO VOLVERIA A ADQUIRIR VISITENOS EN NUESTRA PAGINA DE FACEBOOK Gaezas Outdoors saludos
John
2024-12-31 13:04:54
The Bohning Fletching tool is exactly what I wanted. It took a couple of arrows to get myself and the tool working together but in the end I was very happy with the results. I did four fletcher per hour as a test and love how it turned out.The bonus was that it took 24 hours from when I ordered until it was delivered, that is amazing.
Tristan Stagg
2024-12-24 16:58:42
This is an awesome fletching jig. If your a beginner this is all you need. No need to get all fancy. This does the job and does it well. Great price too.
Recommended Products
$33.98
$ 17 .99 $17.99