Your cart is empty.
Your cart is empty.E-Z Adjustable Steel Crossbar, slip 3/8 IP, adjusts 4 1/2 inch to 6 1/2 inch
Katherine Murtha
2025-08-05 13:28:40
This solved a problem with a wall hung light in our powder room that was a little off center. The old light had been in the same place since the house was built. There used to be an oval mirror under it and a pedestal lavatory and you really couldn’t tell it was off centered. We got a new light fixture and a rectangular mirror and noticed the mirror was centered but the light was not. This adjustable crossbar allowed the light to be moved 1†to the left. It did take a bit of adjusting to get the screws on the light to fit the crossbar and the screws had to be cut but this worked to solve a tricky problem. I could see where this would come in handy for antique lighting which usually didn’t come with crossbars and may have had an odd mounting screw placement.
EMS-KC
2025-07-11 16:37:21
Had a 6†can light opening to convert to standard 4†bracket and this worked perfectly.
Rebecca C
2025-06-30 13:54:27
This crossbar served the intended purpose. It could have had stronger screws for mounting, but it got the job done for sure! I used this to hang all the light fixtures in our new house where the native light boxes lacked the proper hardware to properly secure to the ceiling.
PaulinBoston
2025-06-21 12:21:20
Why can't I find this in a chain hardware store? Older fixtures sometime sneed non-standard hardware.
Heather
2025-06-14 20:18:40
I just wasted an hour and a half screwing around with this because there are no instructions! Maybe I’m just an idiot, but instructions seem like a pretty basic component.
rkint
2025-04-27 11:51:46
We had a light fixture from a previous house. It had been screwed into the laths in the ceiling. The holes were 5-1/2" apart, much wider than a standard crossbar can handle, so it couldn't be installed in our new house. This item bridged that gap. Thanks to Prime delivery, it arrived while the electricians were still onsite. It was a bargain even at the seemingly high price.I wouldn't hang anything heavy off this (no chandeliers). But for a normal light fixture it's great.
Mr. Bill
2025-03-05 13:02:23
This part comes in very handy. I am installing a vintage "schoolhouse" light fixture. I have no original mounting bracket. Brackets come in sizes that match the fixture. Most fixtures today are smaller diameters. There are no actual brackets available anymore. This is where an "adjustable" bracket comes in handy. You adjust it to the size you need. In MY case, i had to expand it to its fullest length. This is the largest bracket available so I was lucky to find one that fit. You do not find these in most hardware or home enter stores.If you are like me and have a vintage light that you wish to restore and mount, this may be just what you are looking for. It beats coming up with a "makeshift" mount or just screwing it into the ceiling which may not be secure. This seems substantial enough to do a decent job and should adapt to most mounting situations.
KC8RXQ
2025-02-17 09:31:51
I returned this product after I figured out a different way to mount some replacement porch lights. The rating is no reflection on the product - it looks very robust and well put together - and I would add that the supplier was very courteous and prompt in accepting their return and crediting my account.
Recommended Products
