Your cart is empty.
Your cart is empty.Product Description
Brake Bleeder check valve- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle, Car Clutch
Step1: Open
1. Open the brake bleeder nipple of the caliper
Step2: Connect the Hose
1. Place one end of the vbaxy hose onto the bleed nipple and secure with hose clip(only recommend)
2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper
Step 3. Release and start press the brake Lever
3.1 Loose the brake bleeder Screw a little
3.2 Start pressing the brake Lever SLOWLY
3.3 Check until all air bubble has been flushed out
3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill
3. The package also includes 2 pcs of brake bleeder screw caps
We also provides the following product
Jimbo279
2025-08-08 14:02:19
Works fine. Makes bleeding motorcycle brakes and clutch a one person job and easy.
Irisheart
2025-07-30 12:34:24
There are many versions of this basic tool. In this application, less is more. The spring in this nicely designed check valve is just the right strength and make bleeding brakes a simple one person job. I appreciate it's small size and quality.
A purchaser
2025-07-21 11:41:25
I used this to bleed the brakes on my truck and it worked fine. The one way valve prevented backflow and the tubing diameter was spot on to fit over the bleeder fittings.I took off one star because the hoses are too short. You have to hold whatever you are draining the used brake fluid into off the ground. Because the valve is top heavy, and the outflow hose is so short, the other end tries to flip up out of the receptacle and sprinkle used fluid wherever it can go. To use this efficiently you need three hands. I only have two. If I had a third hand I would give this item 5 stars.
Paul Ferreira
2025-06-24 10:05:33
Great product, exactly as described
WildBill
2025-05-26 10:41:00
Nice kit to self bleed your brakes. The one way valve is the way to go! So easy to use, just have a container that won’t let the tube come out, and also keep an eye on the master cylinder fluid level as you progress. Well worth the money saved over having a mechanics hourly charge.
Jack g
2025-05-20 17:01:01
worked as it should
Hugh M.
2025-04-27 13:01:15
Did not work on first use. Extremely low quality garbage tool.
Luis
2025-04-14 16:22:47
Worked Perfectly
KS graphics
2024-12-21 11:53:08
Muy facil y sencillo de usar hace el trabajo mas practico
Recommended Products