Shopping Cart

Your cart is empty.

Your cart is empty.

Brass Misting Nozzles for Garden Cooling System 0.012' (0.3 mm) 10/24 UNC (30 PCS)

Free shipping on orders over $29.99

$8.99

$ 3 .99 $3.99

In Stock

1.Color:30 Pcs


About this item

  • Brass / SS 0.012 inches (0.3 mm) orifice, screw Into any 10/24-threaded mist nozzle opening
  • Operation Pressure: 20-70kg/cm
  • Flow Rate: 80-145ml/min
  • Minimal water use of 1/2 gallon of water per hour per mister nozzle
  • Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required



Product Description

mister nozzle
misting nozzle

  • The brass and stainless steel mist nozzle is the most efficient and water conservative mist nozzle available today. the brass nozzle only uses one half gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice.
  • The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
  • The misting performance is excellent. This type of nozzle is applied in the low pressure for-making Leak-proof, durable.
mist nozzle

  • Brass / SS 0.012 inches (0.3 mm) orifice, 10/24 threads Misting Nozzles
  • Operation Pressure: 20-70kg/cm
  • Flow Rate: 80-145ml/min
  • Minimal water use of 1/2 gallon of water per hour per mister nozzle
  • Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required

Brass Misting Nozzles

For Garden, Park

brass nozzle

For Home, Lawn, Patio

misting system nozzles

Package includes:

30 x Brass Misting Nozzles


Stephen M.
2025-08-10 16:06:29
I use these to these to keep my dogs cool in the summer. I just drill small holes into PVC pipe and screw them in. I put the pipe in front of a large ship fan and Voila! Outdoor air conditioning. The mist is very pretty fine and and even. I noticed they were clogging after a few days, so a filter would be helpful. I just swap them out and soak the clogged ones in vinegar for a couple days and rotate them when they clog so I haven't had to buy a filter. I definitely recommend these mister nozzles.
Serendipitous
2025-07-28 14:19:08
Have had no problems!
Alistair
2025-07-04 12:27:57
I love that these are pretty much a universal fit. I have a bucket mister and a hard-plumbed mister on my gazebo. Old one out, new one screws in...20 seconds and you're done. However. I bought 30 of these to replace the corroded ones in my garden. So far I've used about 12, and 2 of those were faulty out of the box. Both simply sprayed a stream of water rather than 'mist'. If that were to continue with the others, that's a 20% failure rate...that wouldn't be accepted in any other product you buy. Luckily they are cheap enough that you can just buy a handful more, but perhaps you get what you pay for.
FJS
2025-05-15 18:35:03
I replaced a few bad misters, these fit and worked perfectly..
Elle
2025-04-03 16:54:40
This nozzle produced a fine mist that cooled me and the hummingbirds well. To get it to mist well, make sure you screw them in tight. You receive 20 nozzles for a great price. I am happy knowing that I will have these on hand to keep me cool for many summers.
slaneco
2025-03-29 16:49:52
great product great price ..... play misty for me !
Ken
2025-02-27 10:16:33
He's missing nozzles work even better than the originals that came with my mister. For the review saying that they fall apart You need to put a pressure regulator on them they're not designed to take full pressure. Love the heck out of these will definitely buy more in the future if I need them
Taunya & Derek
2025-02-21 17:03:23
Two of the emitters did not work at all (no water output) out of the box. Two more stopped misting (no further water output) after just a few weeks. Our system has both a debris filter and calcium inhibitor, and the ones I got at Home Depot last year have worked until recently so it's not our system. As a plus these are relatively inexpensive, but I guess you get what you pay for sometimes.
Tracey Dayton
2025-01-28 14:04:55
Built a mister for the patio and one for the trailer awning. Both work perfectly. A few of the nozzles didn’t mist properly but there are lots of spares. I ended up getting a combo drill/tap so I could screw these right into 1/2” pvc.
g barker
2025-01-19 13:55:53
Worked great cooling me down has a very fine spray ,that is what you want
Biz
2024-12-24 14:31:28
These are exactly what I needed to bring my Ryobi mister back to life.No more endless streams of water.Great purchase.5 Stars!!!
Mike Thorpe
2024-12-17 16:46:57
The product worked good but 3 if the heads had no threads on them
R Wallace
2024-12-04 18:59:49
Had some old, partially clogged mister heads which I wanted to either clean or replace. Found these and thought I'd give them a try. Worked perfectly. Exact fit. Spray/mist pattern is excellent. I honestly can't believe they're as cheaply priced as they are. No way I'll ever clean or mess around with older ones when I can so easily replace with quality fittings at this price point.