Your cart is empty.
Your cart is empty.Product Description
Is this DC12V5A power supply (PSU) compatible with your device?
Please note the voltage
Please find the spec label of your device and check the working voltage. It should be DC24V, not be AC 24V or lower/higher than DC24V. Otherwise, your device will not work or be damaged.
Please note the max current
Check the max current your device will draw. It should be equal to or less than 5A,such as 1A,2A,3A,4A,5A. Otherwise, your device won't work well and the power supply will be damaged very soon.
Check the power input port of your device
Its outer diameter should be 5.5mm; inner core diameter should be 2.5mm or 2.1mm. Inner core polarity should be"+", exterior polarity should be" - ".
Connector Size
Conector size: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm
High Quality Cable
Individual wire insulation and flexible flame -retardant PVC jacket provide you a safe and reliable cable with better conductivity
Broad Compatibility
Max 5A ouput means it can supply with amperage less than 5A. ---such as 1A, 2A,3A,4A,5A. If your device draws 4.5A, 4.5A will be supplied. But if draws more than 5A, only 5A will be supplied.
K-Brown
2025-08-13 10:02:36
The Hiby FD5 comes with a small power adapter (12VDC, 2A), it looks and feels cheap. The Hiby gets very warm with the supplied adapter, almost too hot. With the BTF power adapter, the Hiby runs much cooler and the BTF adapter gets just a bit warm, the sound of the Hiby FD5 is unaffected. The BTF provides clean power, no humming or any audible noise, I'd recommend it for desktop DAC/audio amplifiers. Cheers!
David Gunn
2025-07-29 10:50:51
My existing power brick for my under-cabinet kitchen lighting failed, and and this replacement worked perfectly!
Eileen J. Lobato
2025-05-31 15:53:17
Didn't last more than 3 days. I bought it about 2 months before I installed it, so I can't return it. I installed this power supply with 12v BTF lighs, with a total calcation of 4 amps, 20% under capacity and it died after 3 days of use. Probably 4 hours of total use. Picture shows 5v out when it's rated for 12v.
Mike
2025-04-16 12:02:24
Fairly lightweight when it came which is usually a sign that there isn't much heat dissipation happening on the inside. Connected to a 60W (12V/5A) device snuggly and powered up beautifully.Unfortunately after over an hour of use at the full 60W, the power supply was extremely hot then the unit tripped. So just a reminder, if your device you're trying to power says 12V 4A, get the 12V 5A; if it says 12V 5A, buy the supply rated at 12V 6A. I'll have to return this one and snag the 12V 6A adapter now having read the first bullet point on the product's description.Side note: it's not a UL listed product so keep that in mind if you're using it professionally as an installer.
Cariayn
2025-02-09 14:38:45
Works great for my led signage
Loren Ness
2025-02-04 09:55:16
Tivo roamio was having trouble and this replaced the power supply perfectly!
Frank Monge
2025-02-03 13:32:25
Exactly what I needed.
Jorge Navas
2025-01-04 15:59:37
The media could not be loaded.
Recommended Products