Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
Robert F.
2025-08-17 17:21:38
Needed this for the CV axle of a VW, threads were damaged by novice machanic hammering on it. Re-threaded the axle and nut and worked perfectly. Good to have in the toolbox.
Zakary
2025-07-09 12:45:36
The tap is properly sized, but the die is undersized for the marking. Marked sized is M22x1.75, actual size is M20x1.75, as checked with a caliper on OD of die threads (ID of threads cut to part).
wayne morris
2025-05-15 15:06:26
I was able to fix the threads on the axle so I didn’t have to replace it!!!
Ecas
2025-02-21 18:34:43
Worked great to re-thread both the Axel threads and hub nut for my car.
Timo Wagner
2025-01-20 09:29:12
Produkt wurde schnell geliefert ist in Ordnung und erfüllt seinen Zweck!
Recommended Products
$13.99
$ 6 .99 $6.99