Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
P. S.
2025-08-05 14:08:02
Cuts great male and female threads. Nice and tight.
Gunnerrr
2025-08-01 10:32:52
How can a tap and die set be superior to another? Their made to spec. This set was simply cheaper than the others and works just fine. That was enough reason for me to but them.
Michael Z. Williamson
2025-07-04 12:01:24
Tried them, they work properly and cut cleanly.
Dennis E
2025-04-23 14:57:50
Used to tap hole for 6-32 brass machine screws. Worked great. Only problem was the die was smaller diameter, and I had to buy tools to hold the tap and die. I should have read the description better.
tlp
2025-04-12 13:08:11
it was just what I ordered. well pleased
case455
2025-03-22 11:31:42
A decent balance between quality and price for a rare and archaic thread type (12-32 UNEF).
Jon P
2025-03-11 15:01:26
I needed to make some small screws for someone of varying length. Used both the tap and the die. The tap was used to hold the threaded screw so I could cut a slot in the screw. So the tap and die bot worked well and the screws fit the other person's equipment.
keith
2025-03-09 17:01:37
The tap seem to be halfway decent, but the die is way under size sent the item back
Tomhayes4
2024-12-22 12:00:56
Sometimes SSD 2.5" to 3.5" adapters aren't threaded. This fixes that problem.
Derek Swan
2024-12-17 19:08:58
Works great
Recommended Products