Your cart is empty.
Your cart is empty.Product Description
Specification:
Mini SAS 36 pin SFF-8087 to 4 x SFF-8082 cable
* SFF-8482 side with the 15 pin power
Internal miniSAS SFF-8087 to (4) SFF-8482 connectors with SATA power power.
This cable allow you to connect from a SAS controller with SFF-8087 internal miniSAS connector to four (4) SAS hard drives.
Length is 1 Meter.
Compatible with the following IBM controller as well as others non-IBM controllers:
ServeRAID-MR10i
ServeRAID-MR10il
ServeRAID-MR10is
ServeRAID-BR10i
ServeRAID-BR10il
ServeRAID-BR10il v2
ServeRAID-M1015
Package Includes:
1 x 1M Internal SAS 36Pin SFF-8087 to 29Pin SAS SFF-8482 Data Cable
Raz
2025-07-21 12:41:52
I've tried several different kinds and these ones just perform and work reliably far better than the competition... (what competition? The others suck!)The only drawback to these coords is that the blue section of the cord is a bit frail, if you expose it to tight turns or things rubbing against it, they will break. Even then however they may still function and still better than the competition does bran new.Not really sure why the others didn't work, especially since the others where the approved cords for the other parts i was using them with. But anyway, These work, competition does not.
Matt C.
2025-06-25 10:47:27
You just need enough SATA power connectors to run the drives and these cables will take care of the data. I used this with an LSI sas 9207-8i controller and they worked flawlessly. I've seen other comments that the cables are fragile, but I haven't had any issues. Great value for the money!
Jonathan Peters
2025-06-23 15:54:52
These are my go-to breakout cables. They're reliable and I've used several sets over the years as my server has grown. Haven't had any issues.
Jon C
2025-06-01 14:33:06
The cable is easy to use..it's a cable! This may not be an issue in a real server case, but in my tower I was moving something else in the case and the SAS connector popped free of the drive with very little force. Since you don't usually poke around in the case once things are running it's probably not a big deal, but was annoying at the time. Still gave it 4 stars for the value and convenience of the 2 pack.
C. Warren
2025-05-30 11:22:27
This cable works with a LSI 9702 HBA card for SATA drives, but for me, didn’t work with SAS drives.*** Update: If your SAS drive isn't working (spinning up), it's a pin 3 issue most likely. Tape the pin or use a molex to sata power plug.
Customer
2025-05-25 17:47:25
These cables met and exceeded my expectations. The only downside in my specific case was that they increased the overall size required for a hard drive because of the power adapter. In my case this meant that the computer case I was using couldn't close. No problem if you have the room. Ordered 5 sets, they are all great quality, delivered fast, excellent price, and seem to be working very well. Please consider CableDeconn for your cable needs.
Meyer
2025-05-22 16:20:23
Used for connecting SAS hard drives to an HBA card in my unRAID server. Worked perfectly fine. SATA power passes through.
J. Wessel
2025-05-02 12:37:03
This cable arrived as described, but I started having issues immediately upon connecting to an LSI SAS9211-8i controller. I started with one drive connected on P1, and the config utility immediately gave me errors. The drive also was not recognized. I shut down, connected to P2, and the SATA Power connector crumbled in my hand. Connected the drive to P3, still not recognized. Changed from straight SATA power to a moles-to-sata adapter, and finally the card could see the drives, but still got errors. Removed this cable, and the errors cleared.
Davide Molino
2025-04-24 15:51:58
Il cavo è del classico colore azzurro come da foto, prima della diramazione è ricoperto di calza di nylon per renderlo resistente a usura, entrambi gli standard dei connettori SAS sono rispettati a differenza di altri cavi provati qui su amazon (lato disco sono presenti entrambe le serie di pin dedicati al trasferimento dati). Unico miglioramento che apporterei è la possibilità di sfruttare il blocco presente su alcuni connettori di alimentazione SATA così da renderlo ancora più affidabile.
Paul-Aurian
2025-04-23 10:35:10
Bonjour,A vous qui me lisez, passez votre chemin.J'ai commandé ce câble une première fois : aucun disque détecté.J'ai retourné l'article et j'ai recommandé un nouveau câble : aucun disque ne tourne.J'ai vérifié en essayant exactement la même configuration avec un câble similaire acheté il y a 1 an : pas de soucis.Le prix du câble à baissé, je suppose qu'il ont changé de manufacturier, mais les câbles ne fonctionnent plus.100% défectueux sur deux articles.
alejandro
2025-04-22 18:32:34
Tal cual pone en la descripción, duradero lo tengo instalado en un server y los cables son resistentes se doblan bien y aguantan
pako
2025-03-20 10:41:20
Perfecto, recomendado :D
olivier lefevre
2025-02-13 16:47:27
utlisé pour brancher des disques sas dans mon pc sur une carte controleur megaraid lsi .. ma carte n est qu une 3 gbps alors que mes disques peuvent prendre 12gbps , mais les câbles devraient être les mêmes , juste a ajouter qu il faut le raccord pour alim sata 1 vers 4 alims. la sur l adaptateur il n y a que les liens de data
Recommended Products
$19.99
$ 8 .99 $8.99