Your cart is empty.
Your cart is empty.Product Description
CADUKE 2-Tier Black Mobile Computer Tower Stand & Printer Stand
The printer cart with drawers is made of high-quality MDF Wood & frame of high-quality metal structure.
Multifunction: The bottom metal mesh can put CPUs, files, etc., and the top board can put printers, shredders, etc., under the table or beside the table.
Multifunctional CPU Holder
Wide range of applications, solving your space needs and adding extra storage. Perfect for home study room, office, bedroom, living room, etc.
High-quality MDF Board
Waterproof and sturdy. The Hard-wearing board is rust and stain resistant and easy to clean. Max load capacity wood tabletop: 30 Lb.
Practical Fabric Drawer
The fabric drawer design of cart for pc tower can increase storage space and effectively store A4 paper, folders, rulers and other office appliances.
Breathable Metal Mesh
The bottom metal mesh design of the industiral printer stand for office can increase airflow at the bottom to speed up heat dissipation.
Rolling Wheels and Foot Pads
Four metal wheels and four adjustable pads make computer tower floor stand easy to move, enhance stability, and protect the floor from scratches.
MichelleMc
2025-09-05 18:42:58
My sweet hubby built me a new desk, but it is without drawers or a place to put my computer tower. I also didn’t want the printer on top of the desk. This stand was a perfect solution for all my needs and fit perfectly in the space I needed it to go. It was easy to put together, no missing parts, it’s very sturdy, the wheels make it easy to move if needed and I think it was a great value. The bonus for me is the top matches my new desk perfectly!
Philip G.
2025-08-05 17:51:38
A lot of good, considerate thinking went into this. My hp Pavilion fits perfectly. The grated bottom really does improve CPU cooling. The drawer is made of structured fabric and works great. I've always wanted a dedicated tower stand and I'm very happy with this one. Mine will be stationary so I don't use the wheels, and the bell glides are adjustable so leveling is a breeze. Very sturdy and stable. As to my first comment, there are three sets of screws provided. They included one extra of each. Quality comes from the heart.
Rockladyace
2025-07-25 16:13:10
It was easy to assemble, although the small parts could use better labeling, they were all there. I didn’t notice the drawer is cloth and cardboard, but it will work for light office tools, or paper.
CPD
2025-05-06 17:35:59
I use this as a computer tower and extra storage. I have limited space in my home office and my tower was sitting on the ground below my desk. This gave me extra desktop space for my security system, miscellaneous items in the drawer and got my tower off the ground for better air flow and more foot room.
Douglas E.
2025-04-22 13:39:30
This is a basic inexpensive PC storage shelf. The lower legs snap into the upper legs and things are held together with a handful of screws. I wasn't expecting much for the price. I was however expecting the casters to screw into the legs. Turns out I expected too much. The legs have M6x1 nuts welded in. The wheels provided had a 1/4x20 thread - the don't fit. The leveling feet fit but not the casters. Contacted the seller and they requested pics which I provided. Their reply - no problem, the casters are OK. Well, NO! After another email exchange they agreed and told me they couldn't send the corrected casters as they had none. If that's the case, why put me through the hassle of sending pics. Their advice, return the unit and purchase another. Did just that and the second unit has the same problem! If you're purchasing this with the intent of wheeling it around, either go for something more expensive or be prepared to shell out another $15 for wheels.
SRP
2025-04-05 20:47:00
I didn't realize it had a cloth drawer. The stand is nice and sturdy, but the drawer is made of cloth and is flimsy. I think I'll coat it in resin to sturdy it up. It should have a more study drawer and drawer shelf.
SMOKATRON
2025-04-04 10:46:50
Works great easy to assemble and looks like it would be easy to make any minor modifications. I ordered this for a gaming tower and the dimensions are true. The fabric drawer i thought would be a liability and almost went with one that had a metal drawer. I’m glad I didn’t because there is not much clearance between the top of my tower and the bottom of the drawer, I have two usb port on the top of my tower I didn’t take into consideration when I purchased this unit. The cloth allowed the usb port to still be functional when I needed it if I had bought the other one, i would have to remove the tower from the unit every time i need r those 2 usb3.0 slots I did have to remove the feet from the bottom of the tower so it would fit though by that’s negligible. Pay attention to the screw length when assembling, identify ALL the screws and group them separately otherwise you could end up with one slightly shorter screw when you need that longer one and have to remove each one one by one looking for it to swap it out. If you French try when you should pizza, you’re gonna have a bad tiiiime.Took 30 mins a bong hit to assemble and another 20 minutes to disassemble and reassemble and an additional bong hit.
Customer
2025-03-28 11:57:04
I like this tower stand very easy to assemble , my computer fits perfect and with the wheels I can move it if I need it to clean behind or connect more devices
Zeena
2025-02-10 13:02:01
Practice and good value for money
Diane
2025-01-15 20:11:38
I’m really impressed with this stand! Fast 1 day delivery, very easy to assemble and it’s so aesthetically pleasing to look at. I needed to be able to roll my PC tower closer to my Laser Engravers due to short USB cords. Due to the configuration of outlets in my room , the cords would be in the way and get easily knocked either out of my computer or my engraver. I also wanted my PC Tower to have ample air flow to keep it nice and cool for prolonged jobs. I’ve had too many blue screens of death from having my PC enclosed in a regular computer desk . I’m looking to complete the set now with the printer stand and some shelving units to get my little engraving shop & business launched 😃 can’t wait to share this with my subscribers as well 😃
Customer
2024-12-31 11:24:30
Pretty solid unit for the price.
addison
2024-12-20 18:04:24
The drawer that came with the stand (it’s a foldable fabric drawer btw) is several inches too high and does not fit in the space that it is intended. The wood top came scratched and the dimensions are wrong, the interior height where the computer tower goes is only 18.5†high and is supposed to be over 19â€. My computer is 19.4†tall and does not fit, which makes this stand totally useless to me.
Tammy
2024-11-12 10:19:07
Using as a PS5 stand. This works excellent for keeping it off the floor. Easy to assemble.
Recommended Products