Your cart is empty.
Your cart is empty.Product Description
Seat Lowering Link Kit Subframe Drop Link Kit
By simply replacing a motorcycle's stock shock linkage with with a longer, stronger and lighter Lowering Linkage, a bike's seat height will be dramatically lower to help give those riders with shorter inseams a more confident and enjoyable ride.
Feature:
Longer linkage dramatically lowers seat height
Hard anodized finish
Applicable models include bearings/seals
Step-by-step instructions
Available for most dirt and some dual sport models
Compatibility with:
for Yamaha YZ125 2005 - 2014
for Yamaha YZ250 2005 - 2014
for Yamaha YZ250F 2005 - 2014
for Yamaha YZ450F 2005 - 2015
Lowering a vehicle may require additional components for the vehicle to operate correctly and safely. It is the responsibility of the installer to verify the vehicle is operating correctly and safely after the installation of any aftermarket components.
All parts are made from the highest quality billet 6061-T6 Aluminum Alloy. All parts are polished to a mirror finish and have been fit tested to ensure a quality product，Beautiful And Light
It will reduce the weight of the vehicle and give you a better ride speed, it is perfect for the race
CNC-machined for precise cutting, you don't have to worry about fitting in. Anodized finishing to resist wear and corrosion
These links to lower your for Yamaha by 1.5" (40mm).
Fitted with precision twin-row, caged needle bearings to provide smooth suspension articulation.
Pre-installed in the links is a set of Heavy-lip grease seals to keep lubrication in and dirt and grime out.
It also increases the rear leverage ratio and provides better suspension response.
Better response means more traction, meaning increased control for a faster machine.
Stephen Baker
August 19, 2025
Easy to install and works as it should. Brought the seat height down on my yz125 so my short self can ride it.
jessica smith
July 18, 2025
I am only 5,7 and this made my yz250f easy to ride in the most rough places to ride!!!!! it lowered it down 1.5 inches and made the bike more enjoyable to use!!!! one of the least expensive useful items i put on the bike!!!
aaron canterbury
July 12, 2025
Doesn't fit had to send back.
Rowdy
June 3, 2025
Lower kit installed on a 2011 yz 250. Fit as described. Arrived on time. Don’t forget to transfer over the interior collar's from the old link. No instructions were provided ….
Ally77
June 2, 2025
The newer yz125’s have the same part number as 05-14, as the current product description call for. I measured seat height before and after and it lowered the SEAT height 1.5†as described. The rear fender went down much more, about 3-4â€. This is exactly what I wanted. My only complaint is the bearings can move around (side to side) inside and the seals were pushed too far in the holes. I had to pry them back out to the edges so the spacers would work right. That’s why it got 4 stars instead of five. But it looks nice and fit perfectly on the 2020 Yamaha yz125x.
John Richardson
March 23, 2025
The anodized aluminum coloring is a darker deep red / orange which completely looks terrific. The urethane bushings are included and pre-installed. There is no other hardware or instructions included.
Kavon
February 26, 2025
But high quality and does what it says.
Tom
November 18, 2024
Can’t go wrong with the price, bolt right up to 2017 yz250 make trail riding much more enjoyable. Keep the old linkage for track riding only.
Recommended Products