Your cart is empty.
Your cart is empty.cindy shutrump
2025-09-01 17:38:54
Easy instal on 2020 mb sprinter. Use only 1 horn. Fits good with a bit of rotation to clear grill. For the sprinter, you need a 3/16 or m6,m7 bolt and nut. DEFINITELY louder than factory but not so loud and annoying.
cmski
2025-08-01 16:09:37
I had my doubts that they would fit my 2009 Santa Fe, but it was a perfect fit with the use of the provided horn plugs for wiring (no need for splicing wires). I used the original mounting bars which were about an inch longer than the ones that came with them. The originals are also marked low and high so you know which ones to put where. Whole process to remove front bumper, install and replace front bumper was about 30-40 minutes.Car failed inspection due to weak horn, they wanted to charge me $100 parts plus labor. BIG RIP off, anyone can do this that knows how to use a socket and screwdriver. Look on YouTube for videos.
Derek S.
2025-07-25 12:54:55
My old horn somehow shifted and got full of water. I bought this horn as a replacement because the factory one was way too expensive. It fit right in the factory spot. The wiring harness plugged right in and its just as loud as the factory horn. It appears to be well made and it gets the job done.
rfulton
2025-07-06 11:17:27
Complete kit, easy to install. Arrived as promised. Seems to be of good quality. Horns are plastic but working fine. If you have problems after mounting the horns, make sure you have a good ground.
The Black Stig
2025-06-16 10:19:40
The media could not be loaded.
A. Sanchez
2025-06-10 17:15:34
It works. 2010r56 mini. Super easy to install it comes with the adapter for different applications. Nice and loud i finally got to use it on the road and for sure i got herd. Great quality plastics. Best bang for your buck!!
Darren
2025-05-26 21:13:10
Great kit that is easy to install. The set came with two horns, one high and one low tone, so you'll need a two-horn splitter if you plan to use both. Because of the orientation of the horn's cone, the high tone went on the right side (where the original horn went) and the low tone on the left. On my CR-V Hybrid, there was a place on the left side to mount another horn. You will need a bolt to mount the second horn. The size is M8 with a 1.25 pitch. I ordered a box of different lengths here on Amazon (ASIN B0B9ZWX3Y4) just to have it around. The whole swap took about 10-15 minutes to do.The final sound is so much better than the original clown horn that Honda had. I am very pleased with these.
Customer
2025-05-17 13:17:31
fit my Hyundai accent 2012 hatchback. But it also like burned itself out? Less than two weeks after putting this one on it became VERY quiet when I honked.
LRB
2025-05-08 14:43:56
2024 Toyota RAV4 hybrid with the factory weak horns. Took an hour or so working in the cold to mount the new horns but pretty straight forward. I added grounding washers when mounting the ground terminals on to the horn mounting bolts to ensure a good ground connection. The grounding washers I added should be part of the horn package as should better directions on how to mount the horns.
Ruel G
2025-03-13 13:42:53
Easy to install, sounds better than the stock horn
Hughes
2025-02-26 12:20:36
Easy install as they give you a proper attachment according to your car make-so make sure you order the right one for your car. Even has a ground screw (Hella horn doesn’t provide one), which I just attached along with the mounting screw of the horn. The combo of the high and low tone makes for one LOUD horn that will surely get people’s attention when needed. Nothing but good things with this horn from install, build quality and performance. Installed on my 2023 RAV4 Hybrid. Unfortunately, I took the last Toyota attachment, hope they can restock more of it cause it’s way better than Hella.
Mirek
2025-02-16 12:13:53
Great sound. A definite improvement over the original equipment on the vehicle. Apparently the installation wasn't as simple as I assumed. My mechanic, was cursing me. Not sure if that's due to the cars design or not. All I know it ended up being two hours of labour.
Lucien
2025-01-28 18:35:32
Remplacement parfait pour mon klaxon défectueux.
Recommended Products