Your cart is empty.
Your cart is empty.Product Description
- Material - Made of Copper plated Nickel & Plastic. High pressure resistance, can withstand strong pressure without tripping out.
- Recommended tubing materials: polyurethane, nylon, polyethylene, polypropylene, simple propulsive design, connected to the pipe,providing a safe connection without the need for additional sealing
- 360°rotation: after installation, allowing you to change the tubing connector direction,just rotate the joint body to adjust the direction of the pipe
- The elastic card spring is inserted into the tracheal sleeve to complete the connection.When disconnected, the tracheal sleeve will be pressed.
Elbow Male Thread Push to Connect Fittings
SPECIFICATION
- Working Pressure:0-1.0 Mpa | 0-145 Psi
- Fluid: air, vacuum
- Applicable Tube:PU / PA / PE / PVC
- Working Pressure:0-1.0mpa | 0-150psi.
- Type: NPT Male Thread Elbow
Push quick connect fittings,mainly used for PU hose,nylon hoses;can quickly connect pipes and hose
PRECAUTIONS
- Push Connect Fittings Used for quick connect pipe that can achieve line disconnected or connected
- Wide used in industries automatic equipment as electronics,automobile,machinery,package and medical
- Withstand greater and stronger pressure,Easy to install
- No air leakage after sealing
Good sealing performance
After multiple precision stamping,it can withstand strong pressure without tripping.It has good sealing
360°rotation
The plastic pipe body can be rotated 360 degrees
Copper plated Nickel & Plastic
High quality brass and plastic materials,nickel plated surface,high hardness,corrosion resistance and wear resistance
Automotive Industry and Agricultural Equipment
Used for air and coolant systems, providing quick and reliable connections;Used in farming machinery for diverse hydraulic and pneumatic requirements.
Pneumatic Hydraulic Systems
Used in industries like manufacturing and robotics for efficient air supply connections;also Employed in construction equipment and industrial machinery for fast and secure liquid connections.
- Easy to install and disassemble:these quick connect fittings is easy to install and remove, just simply push to connect the tube.When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe,removed conveniently.
- After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
- After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
Mikee
2025-08-29 14:51:51
good product good price
prongATO
2025-07-18 14:04:26
I installed an auto drain valve in my Ingersoll Rand air compressor and needed a push-to-connect 90 degree elbow to route the hose down the wall of the garage floor. This was the perfect size for the brass fitting and the clear tube I am using to route the moisture from the tank away from the compressor. I set it to run for 0.5 seconds every 30 seconds while the compressor is filling (just wire the 115-120v leads to the switched/fused side of the power on the compressor) so it prohibits and expels any moisture before it gets a chance to build up in the cast iron tank.
Lance wilson
2025-05-20 17:20:17
Race car
Greg B
2025-04-24 10:01:25
Works as designed
Dan
2025-04-18 16:33:34
I bought them hoping to reduce the length of an air hose line by replacing a coupler and elbow with this. Unfortunately the combined length of the coupler and elbow and this elbow were the same length so I returned them.
Buyer
2025-04-15 11:47:18
After years of use, it was time to replace some fittings starting to leak air. Easy replacement, direct fit tube tube and fitting. No more leaks.
Robert Brown
2025-04-04 21:26:05
work good
matt sobieski
2025-03-31 18:33:14
Liked delivery time
Client d'
2025-03-07 17:47:02
fameux très beau kit comme décrie.
67 OutLaw
2025-03-06 14:40:13
Arrived quickly and undamaged, exactly as described
Jim Hunch
2025-03-03 16:58:19
Not 1/4 inch.Not sure why it says 1/4 it isn't. 6mm is the hose connector side. The threaded side is 1/2 inch. Too bad.....👎
Scotty
2025-02-26 11:24:30
It is NOT 1/8 npt female, it's a 1/4! Npt.
Debbie C. Sayer
2025-01-11 17:36:05
Did the job good quality
Recommended Products