Your cart is empty.
Your cart is empty.Product Description
Serial Device Server - Bidirectional Transmission
- The rs232 to ethernet converter is designed for PC software that uses serial port mode and cannot communicate with networked devices.
- Receive the data of the specified virtual serial port, and then send the data out in the form of network data, and convert it back to serial data.
- It is internally integrated with TCP/IP protocol.User can apply it to device networking communication.
UART Interface - RS232 Male
- PIN 1: DCD
- PIN 2: RxD
- PIN 3: TxD
- PIN 4: DTR
- PIN 5: GND
- PIN 6: DSR
- PIN 7: RTS
- PIN 8: CTS
- PIN 9: RI
Network Interface - RJ45 Port
- Support IEEE 802.3、IEEE 802.3u、IEEE 802.3x
- Support Auto - MDI/MDIX
- Network transmission rate:10/100Mbps
LED Indicator
- Power Indicator: Red.(The indicator Light long bright after connecting a power adaptor.)
- LINK/ACT Indicator: Green（The indicator lights and flashes when connected to the network.）
- TX/RX Indicator: Green（The indicator flashes during data transfer.）
Support Flow control CTS/RTS.
- Power Consumption<1.8 W
- Operating Temperature -10-50°C.
- Storage Temperature: -20~70°C
- Humidity: 10%~90%, no condensation
RS232 to Ethernet
Support Work Mode: TCP Server, TCP Client,UDP,VCOM
- Processing high current,stable output
- ESD protection system, 15KV ESD (Electrostatic Discharge) protection
- Support virtual serial port(VCOM)
- Suppor Web Browser Settings
- Support Baud-rate 300bps~230400bps
- Support Reload function
- Support Modbus RTU
FLEXIBLE INSTALLATION
- Size: 7.1x5.7x2.3cm
- Housing Material: Aluminum
- The rugged aluminum housing with mounting bracket provides reliable performance that can be used in almost any environment.
Application:
- Industrial Data Transmission, Industrial Automation,Security and Protection Monitoring, Public Security,Smart Home, Power Control, Environmental Monitoring, Power Monitoring,Self-Service Banking System, Telecom Machine Room Monitoring,CNC Machinery, Process Control Equipment, Serial Printers,etc.
Connection Steps
- 1) Turn off the PC's firewall and anti-virus software, and disable network cards that are not related to the test.
- 2) Set the PC network card IP address to the same as the serial server, such as: 192.168.2.68.The default IP address of serial server is 192.168.2.1.
- 3) Connect serial server and PC with a network cable.
- 4) Connect the serial server and PC with a serial cable.
- 5) The serial server is connected to DC power, the power indicator is on, and the LINK/ACT ligth flashes after self-test.
- PACKAGE:
- 1x Serial Device Server,
- 1x 1.5m DB9 Female to Female Serial Cable,
- 1x DC 5V Adapter,
- 1x User Manual.
Mark C.
2025-08-17 13:07:32
This is easy to configure - the default IP address is printed on the device, along with the default username and password. Configure your PC to that network, browse to it with your favorite web browser.I set mine to us a static IP address in our company's data subnet.TCP mode, I set it in Server Mode using the standard Telnet port number 23. I set the Server-mode timeout to 60 minutes.UDP mode - I left this disabled.UART - I set it to 9600, 8, none, 1. hardware flow control - I have tried it both enabled and disabled - both give me the same result.Deliminator - I left this all unchecked.I am able to log into and manage a Mitel SX200 EL. With the exception of backups everything seems to work.I have another similar device that is allowing backups to work through it, but that company isn't around anymore.We will try another device and see if we can get something that will permit backups through it. When we do, we will deploy them to our customers to allow us to remotely manage their phone systems.
vtgearhead
2025-07-28 15:55:11
By fumbling around I was finally able to get this working. In particular, there is no explanation for the 'delimiter' character options under UART - not even the expected radix (is decimal or hexadecimal argument used, and if the latter what format, e.g. 0x0D vs 0Dh?). Honestly, how much more effort would it have taken to outline these?
Tony F.
2025-06-26 10:38:11
But it took a week to set the converters up for use. The instruction manual, half English/Chinese gives no instructions - only clues. If you are not an IT configuration exper I would look for converters with instruction written for the average user.Tony in PA
Ralph E. Decker
2025-03-18 20:11:49
Cannot connect to it. Same problem as multiple other reviewers.
Johnn Gutierrez
2025-02-18 16:36:38
No es un serial serve, es un serial to RS232 y se requieren dos para que el sistema funcione.la idea del fabricante es que la señal entre como serial , se transporta como serial y sale coo serial.se requiere uno dispositivo en cada extremo para que funcione.***No realiza la misma funciona que un "Serial over IP Ethernet Device Server" que solo requiere un dispositiv para operar y la señal entra como seria y se transporta como protocolo tc/ip y se puede acceder con un solo dispositivo desde cualquier software.
Raymond R.
2025-02-12 15:04:43
I bought this device But can not get online with it. Notified the seller they said they would replace Nothing after months.
Matthew
2025-01-13 15:19:12
No driver included, terrible manual, cannot connect. Ended up buying another one that had zero issues and was easy to use
Recommended Products
$340.80
$ 99 .00 $99.00