Your cart is empty.
Your cart is empty.
Description
1. Suitable for the thickness between 1mm to 5mm of the mounting board.
2. Ideal choice for electrical wiring in the power switches, speed switches and asynchronous motor for their start-up and reversing, also can make the conversion of the control circuit.
3. Widely used as circuit control switches, test equipment switches, motor control switches and master control switches, signal transfer switches, or change-over switch for electric welding machinery and other equipment.
Image3 has shown which terminal will be connected in different position , please read the wiring diagram as a reference.
Position 1 : 1-2 , 5-6
Position 0 : All terminal disconnected
Position 2 : 3-4 , 7-8
Specifications
Model: LW28-32/2
Positions: 3
Terminals: 8
Ui: 690V Ith: 32A
Action Type: Latching
Positioning angle: 60-0-60 Degree
Rating: DC-13: Ui: 220V, Ith: 0.14A; AC-15: Ue / Ie: 380V / 1.5A
Mounting Hole Distance: 48mm x 48mm / 1.89inch x 1.89inch (L*W)
Total Size: 65mm x 65mm x 94mm / 2.59inch x 2.59inch x 3.7inch (L*W*H)
Package Content
1 x Changeover Switch
4 x Mounting Screws
Justin
2025-09-02 18:35:27
Bought the 63A varient, thinking I'd rather have something thats rated for more amps than needed. I'm using it to run a 120VAC lathe that has a pretty hard inrush current draw. Switch has a nice satisfying click when turned to the left/right of center. Little softer when turning back to center. But, it had a decent amount of weight and felt pretty solid. Mine did come damaged, the bottom-corner was broken off during shipping. Though this didn't cause any issues with use.
David F. Branson, AZ
2025-07-29 15:54:42
It worked great in my RC to switch from solar o shore power
Customer
2025-07-27 16:43:30
I used this switch for zone 2 and zone 3 stereo speakers. It is a 3 position switch, off, 1 and 2. In my use it is either zone 1 or zone 2, but not both at the same time. It works and is way cheaper than the cheapest audioswitch available.
TheTimeRider
2025-07-17 14:08:31
Good switch in an RV, BUT the screw mounts on the back of the plate are a bit flimsy...best to use nuts if you can find them.
Cap10USA
2025-07-12 14:49:15
I used it to create an inverter bypass switch in my travel trailer. No problem with the 12 gauge wire. Solid construction. I am confident that it is a quality piece. No issues and I’d certainly buy it again.
Mark Vermont
2025-07-03 12:46:44
I needed a switch that would let me disconnect the solar from feeding the subpanel in my shop and give me the option of connecting the shop sub panel to my generator, which is portable. Because of the way safety is maintained by complying with code, regarding ground neutral bonding, I wanted to switch that would disconnect not just the hots, but also the neutral in the ground so I could maintain my solar inverter system as the source of ground because it is the source of power and still leave my portable generator bonded without creating two neutral ground bonds in one system . This switch allowed me to do that for my 3000W system with a positive disconnect of the neutral and ground.
Brian Barnes
2025-03-17 16:04:20
Super happy with how this turned out. I installed in my RV so that I could switch between shore power and my solar generator. My RV has a 30A system so the 32A rating is perfect. I will say that a small part of the blue plastic was broken when it arrived, didn’t affect the utility or appearance of the product.
Sandy Camp
2025-03-16 17:32:59
I did not receive the needed screw to mount my switch. The instructions were not included, while the ones online were not clear or concise. This vendor needs to be reminded that NOVICES purchase most of their product from Amazon, so they should include instructions for NOVICES that remove all ambiguity and confusion.
Pen Name
2025-03-13 18:03:07
Works great switching between my shore power and inverter.
Simon Paris
2025-01-22 18:18:40
Pour génératrice
JCSimpson
2024-11-25 18:35:11
I have used this switch to jump between shore power (120 v 30 amp) to my solar / inverter system. It works great.
lauder
2024-11-18 11:55:58
Un producto bueno, se ve de buena calidad, el único pero es, que me llego quebrado al parecer no afectó en su funcionamiento y para lo que tardó en llegar lo instalé asÃ.
Recommended Products
