This 5th wheel hitch cover is a lifesaver, especially in the Az heat. It protects my hitch from the harsh sun and keeps the grease from getting everywhere. We have a Reese 20K hitch and it fits perfectly. It slides over the handle and connects with little S like hooks to the rail. The sides have velcro on the inside and we put the velcro straps together to keep the sides taunt. Driving at highway speed are no problem. This cover doesn't move. Excellent investment. The inside has a white felt like feel, the outside black material is a lightweight vinyl type material, stitching is good, velcro is good quality as well as the hooks used.

Good fit in our 5th wheel 3500HD. Very stable while driving, even at highway speeds. Looks great as well!! Cover is very durable, time will tell just how durable!! ThanksUpdate......2017The top portion of this cover is great. The bottom portion started falling apart after the first year. The bottom of the cover is too small for the Q23 Curt system. The velcro system is too long, so you can't get the bottom of the cover to protect the base of your hitch. And the bottom of the cover is useless, while the top is in very good condition, at least on the outside.Update.....2020Still the same, top is still in very good condition and bottom hasn't gotten any worse. Not sure if there are any better covers out there for this price, but $20 for 5 years isn't too expensive to keep our 5th covered and out of the elements.Bottom line...Yes, I would recommend and I would buy another, if the price was right.

It’s it my pullrite super glide hitch without a problem. There wasn’t enough room on the attached Velcro strips to have it hook back over to itself but it also comes with built-in bungee cords with hooks and those attached fine to the frame of the hitch and it’s a nice snug fit on the hitch anyway without being too small and struggling with it. It won’t fly off between the two. I was so happy when I put it on I wish I had it the past 2 years.

I received this cover and was impressed with the quality. It nicely fit my Husky 16K 5th Wheel hitch. The color is black, the width was perfect (not tight but not too loose either) and the height of the cover extended down to the railings my hitch was mounted on in my truck bed. The "slot" in the side, for the handle to pass thru, was approximately 9 inches in horizontal length by 2 inches vertical height, relaxed (not stretched horizontally or vertically). The handle on my hitch fit thru without any problems. There are two bungee cords, one on the front and one on the rear of the cover running completely thru the cover from side-to-side, with metal hooks on each end. They are long enough to easily reach each end of the two railings that my hitch is mounted into to keep the cover pulled down. The cover is made of poly vinyl chloride with a polyester backing (seems like the same material spare tire covers are made of). It has a nice weight to it and rides on the hitch nicely when driving (without a trailer attached, of course). There are 4 velcro/nylon straps, inside the cover corners near the bottom, for holding the cover more securely to the hitch (instead of just using the bungee cords). (I have been driving around town and the bungee cords have held the cover on the hitch sufficiently so far.) Each nylon strap is about 1 foot long. The "concern" with these is each strap has the hook and loop (h&l) portion of the velcro sewn to the same side of the strap. When you wrap the straps around the hitch legs the straps have to be run back thru a loop sewn onto the strap end to make the hook and loop fastener work correctly. You cannot run just the strap around the leg of each hitch (or, more importantly, thru the railings) as the h&l fastener will not attach to itself since the h&l fastener are sewn to the same side of the strap. My hitch legs are 3 inches wide and approx. 1 inch deep and I have just enough strap to complete the run around each leg, back thru the plastic loop sewn onto the inside cover, and fasten the h&l to itself. This isn't a real big deal, but it does seem to cause the cover to "ride up" on the leg a little, exposing the bottom feet of each leg. Again, this would only be a problem if your hitch legs are too wide/deep or you wanted to attach these straps to the railings (straps are not long enough to go thru railing and back thru the plastic loop) to keep the cover pulled down taut on the hitch. It is "designed in the USA" but it is "made in China" per the manufacturer's label. The cover seems nice enough to do what it is designed to do. If you use grease on your hitch head, you may want to remove it before placing the cover on the hitch as the cover has a polyester backing that will "hold" the grease in the fibers and could make the cover messy after a time. I am pleased with the cover but wish the straps could be made to work so that I could attach the straps to the railings, instead of the legs, to pull the cover down taut. But, yes, I would buy again!UPDATE: I now have had this cover for just over 2 years and it is still working great! It sits on top of my hitch day in and day out in the Texas sun and weather, and it still hasn't cracked or come apart! Provides excellent protection for my 5th wheel hitch! I would still, buy again!

In bought this for my Pullrite Superglide hitch , I don`t have a way to remove it and store for when not in use so I gave up the room in my truck bed to keep it attached to the bed. I have only had it for a day and it is snowing so it is already protecting my very expensive hitch. It seems very well made and has bungie straps to hold it on place which worked great in my application. The price point is great. A name brand one with the logo on it was over $200 so I am very happy with my purchase.

Our Husky 5th Wheel Hitch weighs 258 pounds. I am getting older and cannot easily get it in and out of the truck as easily as I used to - always need help. This hitch is expensive ($800+) and I decided to just leave it in the truck, but we live in Coastal area where things rust A LOT. This hitch cover went on easily, and covers MOST of the hitch. It is 24" square, high quality, but would fit better and cover more if it was 28" or even 30" square.

This was a perfect fit for my B&W Companion 5th wheel slider hitch. I ordered another one first, but it was a 24x30 and was way too large to stay on the hitch while driving

ممتاز للحمايه

Really good quality, very impressed with this cover

Pefect fit. Very Good quality. Highly recommended

We have a Reece hitch and it fits as if custom made. Heavy weight and well made..Added after 4 months...... still using this. It got dragged off and on all summer and we are still very happy with it.

Looked like a good quality item but did not for me GM OEM Curt hitch.