Your cart is empty.
Your cart is empty.Product Description
Package include:
- 1x 17HS8401B Nema17 stepper motor L48mm,1.8A, 78oz-in ,4 wires ( Dual shaft)
Wiring methods: Stepper motor's red wire connect to driver's A+ port
Stepper motor's green wire connect to driver's A- port
Stepper motor's yellow wire connect to driver's B+ port
Stepper motor's blue wire connect to driver's B- port
- Step angle accuracy: ±5%(full step,not load)
- Resistance accuracy: ±10%;Inductance accuracy:± 20%
- Temperature rise: 80deg Max (rated current,2 phase on)
- Ambient temperature: 20deg-50deg;Insultion Strength: 500VAC for one minute
Usage or Application
- This products are widely used in engraving machine, printer, medical equipment,embroidery machine, stage lighting, textile automation, printing,packaging and other industries automation equipment.
Timothy A Stiel
2025-08-29 10:48:24
Good motor, pay attention to wiring and connector mount.
gmart
2025-05-23 10:25:09
runs smooth
JACK OB
2025-05-08 10:16:23
Used it to upgrade a cnc for a laser. the double shaft allows me to install a manual knob to adjust z.I needed to remove the controller card to see the pinout lable in the back. the colors are different than my other motor its not plug and play you will need to solder the connection.It works as it should, just took longer than expected to do until I figured out the connection scheme.
Mike Desira
2025-03-12 18:07:01
not tested yet, but things look good.
James Golden
2025-03-09 18:30:40
Used this to convert a Corexy to a Cartesian printer. worked very will.
RJM
2025-01-06 12:29:29
Perfect replacement.
JE
2024-12-11 11:57:32
I'm sure this is a great stepper motor but it's not a dual shaft motor. Does not match item description...
Ukrainian Kozak
2024-12-03 14:35:41
The picture is misleading. Shaft is not even length on both sides and notch on the shaft is only on one side.
Recommended Products
$25.99
$ 12 .99 $12.99