Your cart is empty.
Your cart is empty.With continuous advancements in valve train technology, engine builders and performance enthusiasts alike are witnessing more aggressive cam profiles, higher valve spring pressures and higher engine rpm. Far too often, hydraulic lifters get caught in the middle of these competitive valve train innovations. That’s why engineers at COMP Cams developed the Short Travel Race Hydraulic Roller Lifters using a design that maximizes the performance of hydraulic roller lifters at higher engine speeds. With full travel hydraulic lifters in performance engines, higher rpm are often limited by the incorrect positioning of the lifter’s internal piston, which inevitably “pumps up” during the engine cycle. This improper location results in open valves and therefore leads to lost horsepower and sometimes even engine failure. With the COMP Cams Short Travel Race Hydraulic Roller Lifters, the patent pending design minimizes internal piston movement to cut down on the open valve issues and allow higher engine rpm and thus increase horsepower. The surface of these lifters has been black oxided to significantly reduce surface friction, wear and lubrication temperatures. This creates a high performance, high quality component.
Justin Voskuil
2025-09-05 16:53:03
I was originally concerned that it was going to be a pain to get these lifters adjusted properly due to the many reviews I had read across the web on other sites. But these lifters came with very detailed instructions that I followed in detail. I have put several hundred miles on them since install and have not had one problem.I would not hesitate to purchase again. As long as you can read and follow the instructions you should have no problems with these lifters.
Hellcat
2025-08-05 16:43:54
A lot of complaints about the retainer clips breaking and lifters falling apart online and in discussion boards. I tried it anyway. Less than a thousand miles and one failed. Checked the others and two more with broken clips. Couldn’t find the pieces.
Customer
2025-08-01 14:54:16
Great condition and packaging. Cant go wrong with comp cams
dooleyb
2025-03-15 20:58:16
Have never had a problem with Comp Cam products so using them in the LS1 I am building.
Martin Hendrix
2024-12-17 17:36:22
Comp Cam 875-16....used in alot of Harley's.....including My 2000 Harley Flhtc...NOT a Stock Motor....went from 88ci to 95ci
Gordon Sommers
2024-11-13 13:03:25
I like the way they are made
Recommended Products
$312.95
$ 99 .00 $99.00