Your cart is empty.
Your cart is empty.The reliable C.FCT-1 is Foredom's most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom's C.SCT-1 and C.EM-1 controls. 7-1/4” long, 4-1/2” wide, 2-1/2” high, packaged wt-2 lb /1 kg., 4 Amps, 60 Hz Can also be used with these 115 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors. The C.FCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.
Kurtis
2025-08-28 16:09:18
Great product. Does an excellent job of varying speed!
Rolidnot
2025-07-22 14:04:01
My old Foredom TX motor foot pedal speed controller was worn out so I bought this new one from Amazon.It works great, the speed control is precise and instant and I like the pedal model much more than the desk top version with the hand controlled speed dial.This is a 4 amp controller and it’s made for Foredom motors so don’t try to use it on a 15 amp buffing or grinding motor, it won’t work.I did make a mistake and ordered the FCT-1 foot controller which is the wrong controller for my TX motor. The controllers are same, the difference is simply the plug connectors.The TX motor requires an IEC 15 connector not a standard 3 prong grounded plug (see photo).The FCT-1 controller uses a standard Nema 5-15p plug. Rather than exchange the controller and pay the freight for the exchange, I simply used an 15-IEC3 15 Amp to NEMA 5-15P audio patch cord I had on hand.Worked perfect, saved me the freight and I avoided making an exchange reducing work for Amazon.
EZBuyer
2025-07-16 16:01:42
Works with my Dremel 2001. Now I can activate and somewhat control the speed of my Dremel without having to take my hands off my project! Sewing machines have this feature native to the machine. Dremel still hasn’t figured it out.The old way of using a Dremel is to turn on your tool to the speed that you want - it’s going to stay at that speed until you bring your hand back to the he switch. Reposition your hands with your tool going max speed. Do your work. Take your hand off your project. Turn off your Dremel.With this pedal, position your project and put your hands where you need them to be. Tap your foot to turn on the tool to the desired speed. Release your foot (don’t need to move your hands) when you need the tool to stop. So much easier.
t sull
2025-06-27 11:11:37
Foot control works perfectly to control speed of small motor
Audrey Barnes
2025-06-11 17:29:58
It works but the cord that connects to the hanging engine is too short!! I literally have to place the engine on the floor to use it.
Diann
2025-05-31 09:09:09
I purchased this product for my pasta machine with a motor that I use for polymer clay. Now I can control the speed with my foot which frees up both hands so long strips of clay can be fed into the machine easier.
Usagi
2025-05-12 17:48:52
I use this pedal to regulate the speed of an electric bobbin winder which spins so fast, the thread you're winding will slice right through your finger. This pedal allows me to wind the thread at any speed I want. It is truly amazing, I wish I'd discovered it years ago.A word of advice, my bobbin winder has an outlet with 2 outlet spaces, one marked "motor", the other "light". The pedal that came with the machine can only be plugged into the "motor", it will not work when plugged into the "light". When I plugged the Foredom C.FCT-1 into the "motor", it did not work. In order to work, it has to be plugged into the "light" outlet... A total mystery to me, but the important thing is it works, and exceptionally well.Incidentally, the pedal is larger than I expected. The foot in the picture is a size 7
Glenn T.
2025-05-10 11:18:32
Been using one for many years. The only reason I purchased another one is because I needed it for another machines I was sharing the first one with. Got bugged having to move one between the two machines.
Pierre Richard
2025-04-28 21:19:42
Parfait pour ma machine a coudres, je l'utilise aussi avec ma meuleuse de finitions
mark
2025-02-15 16:53:17
The pedal is a bit big and the travel distance from slow to fast is wide, so you have to really lift your foot high to get the full range of speeds which is not comfortable for long use. There is also a bit of a delay when engaging so if you want to pulse it doesn't work as well.
Recommended Products
