Your cart is empty.
Your cart is empty.
Creality K1 Max PEI Printing Plate 315*310mm Frosted Surface
Features:
PEI with frosted surface: flame retardant and heat resistant
PEI spring plate: high strength and wear resistance
Soft magnetic sticker: strong magnetic force and simple removal
Package: 1x K1 Max PEI printing spring Plate with Frosted Surface; 1x soft magnetic sticker
Andrew
2025-08-22 13:32:46
I printed after cleaning with rubbing alcohol and prints would be effectively glued to the surface to the point I had to heat and freeze the plate a few times and use a lot of force with a print removal tool.It built up residue that I couldn't get off so I went in with 100% acetone which revealed a coating of some sort that started peeling up on the edges where I hadn't printed yet. I thought I'd ruined it at first till I realized what was happening. Only acetone seemed to affect it!After a thorough cleaning with acetone and then a long rinse with hot water I did a final pass with alcohol to remove oil from handling and the thing is pristine with great adhesion but perfectly releases prints after cooling off like it should!Do this one simple trick to prevent uber-adhesion! :D
Jonathan H
2025-08-08 18:55:00
A friend gave/loaned me a printer that had the course build plate. I don't need that tough of build holding so I got this and it's been great. That's a cig pack I'm working on. My current protocol is a print finishes, I peel the plate off, stick it in the fridge for 10 minutes, and the parts come off seamlessly. If you have a printer that takes this plate I highly recommend it. The magnets kept coming off the machine so I put some quick set epoxy under them and now it's a piece of cake to do my process
Lonny Claypool
2025-07-23 18:40:59
This plate fit perfectly, and greatly improved filament adhesion on my CR 10s pro. I highly recommend!
Andrew Alford
2025-06-24 12:37:50
I've had my Ender 5 S1 for close to two years now and could never achieve the results I was after. My son recently purchased a Bambu Lab printer that had a stock PEI plate and every print was pixel-perfect. I had seen similar quality off an Ender before, but I just couldn't make it work on mine. Based on the other reviews, I thought I'd give it a try. I was not disappointed! No more adhesion problems. No fighting to get the print unstuck; just let it cool all the way and it comes right off!I'm finally getting the results I originally expected from this printer. If you're not happy with your prints, I highly recommend trying this route. You'd be really surprised how positive an effect this will have on your finished product.
Dad, the engineer
2025-06-13 14:58:23
I was so disappointed to see that the K1C only came with a smooth "engineering" built plate. My first order of business was to get the Creality K1C Texture PEI Build Plate Kit from KOYOFEI. As far as I can tell, KOYOFEI is a distributor for OEM Creality parts, and not selling aftermarket parts instead. The part appears to be the OEM "B" plate. If you've seen textured PEI sheets before, there won't be any surprises here. The nozzle wiper is present and is adhered pretty well. Unlike textured PEI sheets I've used in the past, I'm actually back to using a glue stick for this sheet. That's not the sheet's fault, though, and is more a function of the high jolting forces of the printer vs. the minimal tree supports I prefer to print. Recommended
Customer
2025-06-02 15:56:55
Best print bed ever. Easy to install and the only one I tried that fit my CR6 SE. it’s especially good if you let it cool down completely before removing the print. If cool, the print just falls off. No bending needed. I’m ordering a second one so I can remove a freshly complete print, set it aside to cool and use the second one to start printing immediately. By the time I get the next print tarted this has cooled off and the print slides off.
lena-paiva
2025-05-31 13:55:32
My prints kept sticking to the glass and I would have to put the plate in the freezer for an hour to pop off. I swear I pulled muscles trying to get them off there. I ordered this and every print pops right off and I love the texture it leaves on bottom. Best thing I have purched for my printer.
Damon
2025-04-28 09:20:28
I have done quite a few upgrades on my (now) old machine. But nothing has made such as drastic diffence in printing overall than this. I wish I had done the upgrade sooner, but so many things didn't work. This one however, worked! And worked phenomenally! I have 2 bambu machines that I use, but this one of course has the larger bed. This upgrade took it from sitting in a corner collecting dust, to "back in the printer rotation"! Absolutely beautiful upgrade!!!!!
sciss68
2025-03-21 15:16:46
Un plaisir à utiliser avec certains filaments spéciaux
Dr Steve Carr
2025-03-11 21:46:27
Hobbyists and professionals frequently counsel using a glue stick or other secondary adhesive to ensure a good first layer. After extensive experimentation, it is clear to me that the CR-6 carborundum plate functions much better without it."Easy to remove" entails two things: its easy to secure to the bed plate with the clips, and sometimes less than easy to remove the print. Chill in the fridge if so; a paint scraper works better than the pallette knife supplied.This plate is more expensive than that for other models: I've continued to use my old one with a few chips and dings. The back up is a good idea: Fudd's Law says, It you pick it up often enough, you will drop it.
V. Holtom
2025-02-10 10:22:44
I am so pleased with everything from creality, just cant fault them, this plate is strong and effective, high tolerances ensure perfect prints
David Närbo
2025-01-23 17:14:37
Blir riktigt fin yta på första lagret och god vidhäftning, fungerar kanon tilsammans med carbon fillamemts
J A
2024-12-14 12:56:57
Drucker: Creality Ender 3 V3 SEPlatte passt 100%Drucke haften ohne weiter Mittel Perfekt auf der Platte und lassen sich nach beenden des Druck genauso gut lösen.
Recommended Products
