Your cart is empty.
Your cart is empty.Product Description
ON OFF Round Rocker Switch Spec:
Rating: 10A 125VAC; 6A 250VAC; 20A 12VDC
Function: SPST 2 PIN ON/OFF
Shape: Round Shape, Black Color
Features: with 5 sets of #187 Terminal Wires
Insulated Resistance : ≥ 100 MΩ
Contact Resistance : ≤50 mΩ
Dielectric Strength : ≥ 1500V AC/5S
Operating Temperature : T85
Electrical Life : ≥10000 Cycles
SPST ON OFF Switch
KCD1 ON OFF rocker switch is 2 pin SPST ON/OFF function(single pole single throw) with #187 quick-connect wires. 10A 120V AC; 20A 12V DC Rating.
T85 Small Mini Switch
The 20mm Small 12V rocker switch is Snap in Panel Mount design for easy installation. It comes with a keyhole slot to prevent unwanted rotation.
Round Switch Application
The Mini Round rocker switch can be widely applied to various vehicles DIY including car, Automotive, RV, Marine, boat, and Electronics modification.
Corey C.
2025-09-01 10:22:33
âââââ Reliable and Easy to Install!I bought this DaierTek ON/OFF Round Rocker Switch 5-pack for a few small automotive and DIY projects, and I couldn’t be happier with the quality. These switches feel solid, click firmly into place, and work exactly as expected.Pros:✅ Easy Installation – The pre-wired leads saved me time and effort. Just connect, and you’re good to go.✅ Great for 12V Applications – I used these in my car and on an RV project, and they handled the voltage perfectly.✅ Compact but Sturdy – The 20mm size makes them fit well in tight spots, but they still feel durable.✅ Good Value – Getting five at this price is a great deal, especially since they all worked flawlessly.
Alyxa
2025-08-26 15:24:39
I needed a light switch and it did the trick. It has a nice click to it and it's not possible to have it get stuck half-way. I appreciate the push connectors so I'm able to fit the switch before installing everything. I had to fit it in a panel, and it fit the hole snuggly. It has been working great since I installed it. I'm not sure what I'm going to do with the spares, but they're cheap and can be used for other projects.
Alexis
2025-08-25 16:36:08
I wired this switch to a 9v battery and a led strip and it works great. The switch has a satisfying click too, i have the urge to flip it everytime I look at it. The connectors that come with the switches make it easy to wire this to anything since soldering anything to those little prongs sucks balls. If you ever need to sand the casing of the switch down its pretty easy to sand it (i got unlucky on the sizing for the hole in my project 🗿) 10/10 would buy again for future prop making
OU812
2025-08-08 13:30:56
Works well, but will need a slighlty larger than 1" bore needed for placement.
Rohan
2025-07-27 17:27:45
Quick shipping. Works as it it supposed to. Easy to install.
Erik Thorkildsen
2025-07-16 18:02:46
A great set of switches. They set in to the hole securely and have a great positive engagement when flipping off and on.
Lavita Wilkinson
2025-07-13 11:42:38
I used this as an interrupt for a sensor wire to a solar array's control box to fool it into thinking it should turn on the pump regardless of the pressure in the tank. It's a somewhat smaller gauge than I'd prefer but plenty beefy for the application.
tomiahawks
2025-06-30 12:56:08
They fit the 20mm hole and work like an on off switch should work. Priced right
Travis S.
2025-06-26 18:23:19
These work just as expected. Had a little trouble getting the exact hole size right but putting a bit of black silicon on the back solves that and keeps them from moving around. I'll do it the same way next time
GNG
2025-05-09 14:58:47
I installed this with a lighter charger in my RV to access the 12V battery power. It works well. It was easy to intall and the backing made it fit snugly, making the switch sturdy when used.
Joe bidden
2025-02-22 17:46:04
Awesome switch good quality to, was able to cover up a 1 inch round hole covering it all up
Mio
2025-02-17 11:49:42
Works great, looks great
PNW Batcave
2025-02-05 21:24:00
They work perfectly. The only drawback is the red and black wires provided. As this is a single pole switch, only the red wire is needed.
Recommended Products