Your cart is empty.
Your cart is empty.Daystar Comfort Ride 0.75" Lift Coil Spring Spacer Kits with Bump Stops are designed to improve ground clearance, allow use of large tires and enhance the performance of the vehicle. They are made from high density polyurethane that ensures long lasting durability. These kits facilitate easy installation
JT
August 26, 2025
So you just finished lifting your Jeep and you find the back sticks up higher than the front. Oh no! Not the stinkbug! I hate that! Load all your stuff in and it still looks like it's higher in back?Here is the solution, this 3/4" spacer with stack with your OEM rubber coil spring isolator to bring you up another 3/4" or you can run it to replace a stock isolator for a 1/4" increase in height. Note that having this spacer only will transmit more road vibes to the body than keeping rubber touching the coil.Also, this product does come in other sizes if you need further tuning.Finally, take a moment to look at the ball joint at your Pitman Arm and Right Tie Rod End for binding. My lift kit directions said nothing about this and I noticed it after lifting. When flexing offroad you could bind or even break these joints if they run out of travel. The solution was Currie Enterprises "Currectlync" steering system. It is 200% stronger and bolts right up with no other mods (for use with 4-6" of total lift).Hope this helps you out!
KFH
August 19, 2025
These are fine as a replacement for stock height spacers. They don’t really add any lift unless you stack them with other spacers. I replaced them with a taller set so I didn’t have to do that (out of respect for my Jeep lol).
Robert P
July 30, 2025
I installed the Daystar 1-3/4†on the front and added the Daystar 3/4†to the rear , installed new shocks and used the day star shock boots as well, this all leveled out the Jeep perfectly within my budget perfectly.
R G
July 22, 2025
It did what I wanted and was not to difficult to install with spring compression tools. Went right in.
FlyingLC
July 13, 2025
Fast shipping and great quality. Product is just as described.For a 1998 Cherokee... If you plan on tossing the factory spring pads YOU WILL NOT SEE ANY GAINS. The old pad is also a .75" pad. The instructions say you can stack them but mine were beat and I really didn't like that idea. This pad would serve great as a factory replacement but for leveling the front end I would recommend the Daystar 1.75" spacer which will net you 1" of lift.
Customer
June 16, 2025
Did what I needed, replaced worn rubber mounts, no issues after being in mud, rain, and snow.
Customer
May 11, 2025
Install these is fairly straightforward and simple long as you drop everything that you need to drop watch a good video and have a spring compressor on hand, got mine from Harbor Freight.
ss427ci
April 9, 2025
These worked great on top of my factory rubber spacers. I used these to level out my 01 Cherokee XJ after I added boomerang shackles.
lilly perreault
March 13, 2025
as described, good fit
Shane Kaizer
March 6, 2025
Good fit. Just what I was looking for
Ed
January 25, 2025
Unfortunately these did not fit my application and were returned however I did not have a jeep which is what I believe they were designed for other wise the quality looked fine.
Recommended Products
