Your cart is empty.
Your cart is empty.Daystar Comfort Ride 1" Body Lift Kits include lift, sleeves, bolts, hardware and radiator core supports. These lift kits are designed to maintain the proper frame and body alignment of the vehicle. They are made from heavy duty material that ensures long lasting durability. These kits are easy to install.
tom chmielewski
August 28, 2025
The kit was complete and high quality Polyurethane. The hardware was exact and the directions were pretty good. One item to pay attention to was the fuel filler neck on the Jeep. Remove the four screws that hold the filler neck to the body before lifting the Jeep. You may have to loosen the hose clamps at the fuel neck and vent line and extend them for a proper fit. Really easy to do but I don't think that was stated in the directions. Overall, very happy with the kit and the price was the best as far as quality and completeness. I would recommend it.
Customer
July 27, 2025
Everything went on great. Two holes in jeep frame (where body mounts fit in) had to be enlarged slightly but none of the other 9 did. Used a dremel but a file or even sandpaper may have worked well enough as it was just barely too small. Everything in the kit seems quality. I installed the transfer case linkage adapter too with not too much trouble. Biggest pain was that I had to trim my radiator shroud due to the bottom hoses not letting me adjust it to not hit the fan. To do this, the easiest way was to remove the shroud...so I had to remove the radiator fan to remove the shroud. Had to "borrow" a fan removal wrench from autoparts store. Once this was off, trimming radiator fan shroud was easy. Then the other PITA was my gas filler tube didnt reach the filler housing anymore by .5 inches. The hose had to be loosened so I could pull the filler neck out more, but my hose was old and stuck on. I just bought a new hose and removed the old one.Oh, and if you have rocker guards/ panels that use the old body mounts (which needed trimmed), you will have to trim your new body mounts in the same location. Not a problem at all, i used a good kitchen knife to cut the poly bushings down 3/16".So, as far as the kit goes, it was great. It was the other things that had to be adjusted/ altered that were the real pain. No fault of the kit, as it did exactly what it was said to do and the instructions warned of the other issues. Guess these things come with the territory when installing a body lift.Everything is good now, got 31's on with no rubbing. Looks great. I would highly recommend this kit for a 1" body lift over the ones that just add pucks. New bolts, new mounts, cant beat that.
Nathan0259
July 7, 2025
Very cost effective, awesome body lift. Comes with everything you need to install the lift. The instructions are clear and easy to understand. It's not rocket science to put one of theses on but it's very helpful to have all the parts needed and good instructions. Daystar is a stand up company and I am happy with each of there products I purchase. Don't buy hockey pucks or aluminium spacers and end up reusing parts of the old body mounts. This kit is the way to go.
Jack
June 30, 2025
I got a 97 TJ about 2 months ago that needed some work. The previous owner had put a 3" RC suspension lift and a 3" RC body lift and anything over 1.5" on a Wrangler is dangerous so I had to replace it. Wanted a 1" as I'm doing a Tummy Tuck and 1" lift MM's as well and these came highly recommend.Just as others have said, the kit is great but the washers are JUNK. I wanted to be sure before I got Grade 8 replacement and check out the pic of how bad the washer cupped in and I didn't even get it torqued down to 35 ft lbs yet that was maybe 15-20. Other than that, kit seems to be great. Have yet to take it out on the road but install was easy.
Eric Luther
June 6, 2025
Seem pretty good so far.. use some lock tight on them....
TJ cpl
May 15, 2025
I put this on a 04 Rubicon as one of the steps for a tummy tuck skid plate. Went in easily so just follow the instructions. One side at a time and watch the fuel filler tube. A video on YouTube shows pulling the headlight to gain access to the rad-support bumper install but I did it with long reach pliers. Remember to recheck bolt tension after a few drives. Mine did loosen a little but checked 4 more times throughout the season and were good.
Dylan Fahey
May 10, 2025
The install was easy via youtube videos. The problem (not the kits fault) was in adjusting the 4WD selector shift plate. Took a test drive and 4wd kept popping off. But after adjustment, all good. We did have to trim the Radiator Fan Shroud. But a big improvement in body height. My friend said this kit had all the parts necessary. Thank you! Dylan
Alejandro
May 7, 2025
Note that there is a bolt that is longer and goes to the front of the jeep. If you place it in the back it will poke a hole in the trunk.
Dvltash
April 23, 2025
I picked these up as a replacement for the Curry body lift that I had because my factory tops and bottoms were shot.I didn’t realize that I would still have to re-use some of the parts of the OEM set up to make this work and ended up having to buy more parts.In the end, this system cost me more than just replacing a couple parts, but overall this is a good system.
Julie Nolan
April 22, 2025
should come with placement diagram, building jeep from scratch and had no idea where which part went
Tanzanite Toolkit
February 24, 2025
Good kit easy to install.
Kevin V
February 15, 2025
Best body lift you can get for a jeep. Good price too.
Recommended Products
$126.33
$ 62 .99 $62.99
$179.95
$ 87 .99 $87.99