Your cart is empty.
Your cart is empty. H3Y-2 DC 12V delay timer time relay + H3Y-2 base
Model : H3Y-2
Material : Metal, Aluminum, Plastic
Supply voltage : DC 12V
Allowable voltage change range : 90%~110% of supply voltage
Power consumption : 0.1W~1.1W
Contact Capacity : 240VAC 5A
Work mode : electricity delay
Pins : 8
Rated time Range : 0~60 s
Environment Temperature : -10℃ - +50℃
Environment Humidity : 35%~85%
Relay Size (L x W x H) : Approx. 5.7 x 2.8 x 2.2cm / 2.2 x 1.1 x 0.9 inch
Base Size (L x W x H) : Approx. 7 x 2.3 x 3.1cm / 2.7 x 0.9 x 1.2 inch
The relay has two indicator LEDs; one lights up once it receives 12VDC power showing the time sequence has been initiated; the second one comes on once the selected time has elapsed and relay is energized.
Package included :
1 x H3Y-2 Delay Timer Time Relay
1 x Relay Base
teequeue
2025-08-30 18:32:50
I wanted to add a short on-delay to my central vacuum system. I didn't like having the motor short cycle every time I opened an inlet valve, so I first tried a $30 Geya Multi Function Time Relay. The Geya's on-delay didn't work for me (their tech support was very responsive, though), so I ordered this Omron H3Y-2, and it works well. I set a short delay that gives me enough time to open an inlet valve and connect the hose. I can live with having the short delay when I move the power switch in the hose handle to the ON position. It works for me, so I'm satisfied.
Tom
2025-08-09 17:06:06
Worked well to provide a time delayed torque converter lockup on a custom installation of a THM700R4 transmission in a vehicle without the original GM transmission computer.
Lena
2025-07-13 17:10:48
This time relay is great for anything you may need. However, it requires a very high amperage. Still a great purchase, just keep amperage in mind.
Las Vegas Naturists
2025-07-01 21:47:20
Check polarity on 12 volts. Diagram was confusing and reversed polarity will light up power light, and the time out light and timer works. But the relay will not work on reverse polarity.
tugboatdriver37
2025-05-24 16:29:24
Would not work, will be returning.
DM
2025-03-04 17:08:27
Upon applying power (12VDC) the Relay does nothing until set delay expires, then it energizes. 2 sets of N/O and N/C Contacts.
J COOLEY
2025-01-10 13:52:28
I used this to trigger the bilge blowers on a Chris Craft build so that the blowers run for a full minute before starting the boat.
Recommended Products
