Your cart is empty.
Your cart is empty.Product Description
Baroque Tossit
2025-09-06 14:04:46
I'm using the brush on a parts washer - the type you'd find in an auto repair shop or machinist shop. The hose fit very tightly on the nozzle of the parts washer and (so far) I've not had to add some type of hose retainer to keep it in place. No fluid leaks back through the hose and onto the nozzle, all of the fluid goes through the brush. The bristles are considerably stiffer than I had expected - this is NOT a soft brush. It does a nice job of (for example, cleaning the grease out of wheel bearings. The bristles aren't stiff enough to damage the bearing material (I'm using a water-based solvent and so can't comment on how the brush handles mineral spirits or petroleum based solvents). The 30" length of the hose is right for my 5 gallon tub - not so long as to get in the way and not so short as to make using the brush a trudge). Quality is fine - there are no sharp points on the handle to worry about and I've not (yet) noticed any bristles coming loose from the handle.
Greg
2025-05-31 11:40:31
Good product
TJS
2025-05-03 13:57:09
Beware....The hose is not solvent resistant. After one week in my parts cleaning tank, the hose swelled to double its size and now will not stay on the solvent arm. Unbelievable that you would make and sell a cleaning brush for a solvent tank that is not solvent resistant!!! I use PSC 1000 parts cleaner.
BillJ
2025-03-28 18:36:54
Great brush. Easy to install and use.
Rob
2025-03-19 10:07:03
Brush works good however the hose swelled up and won’t stay on brush I’m going to put a hose clamp on it I guess
Tony Wall
2025-02-13 21:51:20
It's hard to find these at parts stores anymore. Works well with my 20 gallon parts washer.
ernest d.
2024-12-18 11:19:36
A must have and top shelf material makes cleaning parts not a dirty thing anymore
Walter p.
2024-12-13 20:21:08
Works well and a long hose
Recommended Products