Your cart is empty.
Your cart is empty.Product Description
heathde
2025-09-04 12:54:11
Bought this diamond coated round hacksaw blade to remove a piece of decorative travertine border (in 2 locations) in order to install a glass shower screen channel. A water spray bottle was used to eliminate dust and improve cutting. The blade worked quickly and without issue. To get the blade closer to the surface tile tension on the hacksaw was reduced to allow the blade to flex...again no issues. Only one blade was used and it's probably still good for next job.
GearieTheGrench
2025-08-20 10:27:27
My problem is that Amazon drivers keep ignoring my delivery instructions. I have had several packages stolen because of it. Once again the Refik use to use the code provided and placing my packages inside of the door.
Jorgie
2025-08-11 17:13:16
Perfect for the job that was needed for
John Miller
2025-08-08 11:21:07
Cutting hard thick steel.
Christopher Muller
2025-07-27 21:41:18
I needed to cut a piece of marble for a door threshold. I was a little skeptical about something so inexpensive would be any good. But this saw cut through the marble like butter! I was very pleased.
Simon
2025-07-22 10:01:49
Takes a while but can be used with a regular hacksaw to cut bricks.
ANDREW K.
2025-07-18 20:29:08
I bought this to cut the small corners on a piece of quartz that i had to cut.Slab was too heavy to flip over..i just needed to cut 1/4 by 1/2 on the bottom of slab..it just scraped off the diamond coating on first try..garbage
"RICO"
2025-07-16 16:44:14
Nice and steady and pritty good on softer material like African Mahogany and Hard Maple, not very good on harder woods ie... Pink Ivory, Bubinga and material higher up on the Janka Hardness scale.
Bullet
2025-07-08 11:38:56
I used these blades in my hack saw to cut ceramic tile . They cut great.
Chegord
2025-06-29 12:10:13
Sold my wet tile saw when I moved house. Not smart. Decided to install a marble backsplash and no saw. Didn't want to rent one for this smaller job. Bought these rod saw blades and they worked really well. Made over a dozen cuts on 2X4 mosaic marble tiles. No problem. First blade started to dull so just turned it around. Still have one new blade and one half used blade. Good for weird little cuts too. Just needs patience.
heathde
2025-06-21 13:16:00
Bought this diamond coated round hacksaw blade to remove a piece of decorative travertine border (in 2 locations) in order to install a glass shower screen channel. A water spray bottle was used to eliminate dust and improve cutting. The blade worked quickly and without issue. To get the blade closer to the surface tile tension on the hacksaw was reduced to allow the blade to flex...again no issues. Only one blade was used and it's probably still good for next job.
GearieTheGrench
2025-05-14 16:33:10
My problem is that Amazon drivers keep ignoring my delivery instructions. I have had several packages stolen because of it. Once again the Refik use to use the code provided and placing my packages inside of the door.
Jorgie
2025-05-05 13:18:44
Perfect for the job that was needed for
John Miller
2025-04-30 17:53:57
Cutting hard thick steel.
Christopher Muller
2025-04-09 15:22:01
I needed to cut a piece of marble for a door threshold. I was a little skeptical about something so inexpensive would be any good. But this saw cut through the marble like butter! I was very pleased.
Simon
2025-03-31 14:00:52
Takes a while but can be used with a regular hacksaw to cut bricks.
ANDREW K.
2025-03-14 15:14:20
I bought this to cut the small corners on a piece of quartz that i had to cut.Slab was too heavy to flip over..i just needed to cut 1/4 by 1/2 on the bottom of slab..it just scraped off the diamond coating on first try..garbage
"RICO"
2025-03-10 10:15:48
Nice and steady and pritty good on softer material like African Mahogany and Hard Maple, not very good on harder woods ie... Pink Ivory, Bubinga and material higher up on the Janka Hardness scale.
Bullet
2025-01-10 14:45:30
I used these blades in my hack saw to cut ceramic tile . They cut great.
Chegord
2024-12-29 11:44:11
Sold my wet tile saw when I moved house. Not smart. Decided to install a marble backsplash and no saw. Didn't want to rent one for this smaller job. Bought these rod saw blades and they worked really well. Made over a dozen cuts on 2X4 mosaic marble tiles. No problem. First blade started to dull so just turned it around. Still have one new blade and one half used blade. Good for weird little cuts too. Just needs patience.
Recommended Products