Shopping Cart

Your cart is empty.

Your cart is empty.

Digital Radiator Fans Controller Swith Kit 12V and 24V, Adjustable Temperature Range Digital Electric Thermatic Fan Switch Kit from 104ºF to 230ºF (40°C to 110°C) Replace #0444 DC0444

5.0 Write Review
Free shipping on orders over $29.99

$42.59

$ 19 .99 $19.99

In Stock

About this item

  • 【Replace Part Number】Adjustable Digital Radiator Fan Controller Switch Kit with 12V and 24V replace 0444, DC-0444, DC0444.
  • 【Widly Application】ISINFLASH fan controller switch kit can be used for 12 or 24-volt applications, operating 1 or 2 fans (if you plan to operate 24-volt fans, you will need to purchase a standard 24-volt relay). This digital radiator fan switch kit can be used for thermoelectric fans, EWP, and similar models.
  • 【Digital Radiator Fan Controller for 0444】The temperature sensor is placed in the radiator fin section and senses the air temperature as it passes through the radiator, has an adjustable temperature range of 40°C to 110°C (104°F to 230°F), and displays the temperature reading in either Celsius or Fahrenheit. The 0444 sensor can also be placed directly into the cooling system with the Temperature Sensor Adapter Kit (part number 317-DC-0409).
  • 【Operation】The adjustable fan controller operation is at a single speed. Fan #1 will start once the temperature reaches the set temperature. Fan #2 (if applicable) will commence operation 10 seconds after fan #1 starts. The fan(s) will continue operating until the temperature falls by 5°C below the set temperature.
  • 【Specification】Digital electric radiator fan controller with Dual Relay, LED digital temperature display with actual temperature + set temperature, Push button temperature setting, Pre-programmed microcontroller circuit type, Dimensions: 3.75" x 2.6" x 2.2".


Product Description

Digital Radiator Fans Controller Swith

AIR TEMPRETURE APPLICATION

The temperature sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).

WATER / COOLANT APPLICATION

The 0444 sensor can also be placed directly into the coolant system and no need to cut hoses. You will need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment. It is recommended to install the sensor in the return hose from the radiator.

Digital Radiator Fans Controller Swith
Digital Radiator Fans Controller Swith

SPECIFICATION

  • Relay setup: Dual relay
  • Sensor Wire length: 142cm in total (Wire from switch 112cm plus sensor connector 30cm)
  • Speed: Single speed, 10 second delay to start up the second fan
  • Applications: Suitable for single and dual fan applications
  • Screen Display: LED digital temp display, actual temp + set temp
  • Temp Display: Centigrade or Fahrenheit
  • Temp settings: 40°c to 110°c (104°F to 230°F)
  • Temp setting: Push Button
  • Circuit type: Pre-programmed micro controller
Digital Radiator Fans Controller Swith