Shopping Cart

Your cart is empty.

Your cart is empty.

Digital ultrasonic paut Flaw Detector Weld Testing Equipment 0~10000 mm Digital Ultrasonic Flaw Detector 0.4MHz~20 MHz Ultrasound Wave Flaw Tester

5.0 Write Review
Free shipping on orders over $29.99

$1.36

$ 0 .99 $0.99

In Stock

About this item

  • Ultrasonic defectoscopy category: It can detect, locate, evaluate and diagnose various defects (welds, cracks, inclusions, folds, pores, blisters, etc.) in the workpiece quickly, conveniently, without damage, and accurately
  • Features: Automatically record the inspection process in an unlimited time, high-speed scanning, ultra-low noise, intelligent and precise, easy to carry, shockproof and antimagnetic, one-key automatic calibration, 130dB high gain.
  • Main use: Widely used in manufacturing, steel and metallurgical industry, metal processing industry, chemical industry and other fields that require defect detection and quality control. It is also widely used in in-service safety inspection in aerospace, railway transportation, boiler and pressure vessels, etc. And life assessment. It is a must in the non-destructive testing industry.
  • Compared with X-ray flaw detection, ultrasonic flaw detection has the advantages of higher flaw detection sensitivity, short cycle, low cost, flexibility and convenience, high efficiency, and harmless to the human body.
  • It can be used for 10 hours when it is fully charged and easy to carry.


❤SPECIFICATION❤
Scanning range: 0～10000mm steel longitudinal wave
Working frequency: 0.4MHz～20MHz
Vertical linearity error: ≤3%
Horizontal linear error: ≤0.1%
Gain: 120dB
Sensitivity margin:> 62dB (depth 200mmΦ2 flat-bottomed hole)
Resolution: >40dB (5N20)
Dynamic range: ≥32dB
Noise level: Hard sampling frequency: 320MHz
Repeated emission frequency: 100~1000HZ
Sound speed range: 100～15000 (m/s)
Working mode: single crystal flaw detection, double crystal flaw detection, penetrating flaw detection
Digital suppression: (0～80)%, does not affect linearity and gain
Working time: more than 10 hours of continuous work (lithium battery)
Ambient temperature: (-20～70)℃ (reference value)
Relative humidity: (20～95)% RH
Dimensions: 238×155×46mm
Packing list: 1 flaw detector, 1 straight probe (2.5MHz, φ20mm), 1 oblique probe (5MHz, chip 8mm×9mm, angle K2)
1 10V power adapter
Probe cable 2
Product packing box 1
1 manual
PC ultrasonic flaw detector communication software 1 (disc)
If you still have any questions, welcome to contact us, our customer support group will respond to you within 24 hours.