Your cart is empty.
Your cart is empty. Features
High-speed IC,bright red LED,easy to install.
Good stability, strong Anti-interference.
Counting value be retained when power failure.
Widely use in Automatic Burden System,Winding Machine,packaging machinery,textile machinery,ect.
The meter retain the number automatically when power cut off.
Specifications:
Power supply:DC12V
DC Current:30mA
Sign:Pusle signal,NPN 3 wires normally closed
trigger mode: rising edge
Display dimension: 0.56" RED
Reset signal:Pulse or switch
Counting:Plus or minus
Response frequency: 100HZ
Display range:0-9999
Panel cutout dimension:76.5mm*39.2mm
Overall dimension: 79mm*43mm*30.5mm
Sensor dimention: M12x37mm.
Detection range: 10mm
Detected objects: magnet
Sensor appearance:M12mm cylinder.
Sensor wiring:brown---Power+;blue---Power-;black---signal.
Operating temperature: 0 to 50¡ãC.
Packaging include
4 Digit red counter x 1
Hall proximity sensor x 1(come with magnet)
4 wires cable x 1
2 wires cable x 1
Instruction x 1
Len
2025-08-15 16:54:48
Added this to a mini lathe to be able to set the 'sweet' spot on the speed for frequent projects.
Victor C
2025-07-26 14:54:08
Instructions were clear and unit worked perfectly first time. I used the unit to count rotations of the anchor windless so as to know the amount of anchor chain that is paid out. This unit came with a nice quality hall effect proximity sensor. The counter has independent up and down count inputs. Connect the sensor, via a SPDT toggle switch to select when counting up or down. A reset switch or button is also needed.
Bren S. KS
2025-07-20 15:16:45
I bought two of these for a putting green and am installing them to count attempted or made putts. In the testing phase, the first one I tried would come on but the switch would not activate. The second one worked great. I have a plethora of hall sensors and can wire one up that works, but quality testing must be one of those things they scrimp on to keep the price low.
SLMarmom-Terry
2025-06-26 17:11:56
Insufficient information for buyer to know all that will be required before this counter will function.
Scott Shaw
2025-06-15 10:05:30
This counter works well in my application. Easily set up . Although I give this product 4 stars there are two things that I would change. First the magnet for the sensor is not very strong. Also this unit does not have a reset switch included. Which i knew prior to purchase.
D. Carr
2025-05-11 10:49:39
Created counter for maxiclimb exercise machine. Perfect.
BobbyS
2025-04-14 16:31:45
This counter works well but it didn't last long at all; maybe 4 hours total usage time. You would think that in today's electronics an item would last a loooong time. But this one does not. I ordered another one so I can have something in the meantime while I find a better counter.EDIT: Just received another one thinking the one I had was just a bad one. The new one is no better! They say it is good for 100 Hz but I can only get it to operate reliably up to 16.6 Hz. Anything over 1000rpm it stops counting.
Mary Jane Arellano
2025-04-09 18:47:08
I have this item and it works perfectly. I got it three years now and still working very well. I use it as a bobbin thread counter for my sewing machine.
Robert S. Neilson
2025-02-01 20:36:12
I bought this to make a counter for Crank Revolutions on my bike for training. It set up with no problems but I used a bigger magnet instead of the one supplied. Early days, but delighted so far.
RX-78
2025-01-31 14:23:10
日本製ã®ã‚«ã‚¦ãƒ³ã‚¿ãƒ¼ã¯æ¶²æ™¶è¡¨ç¤ºãŒå¤šãã€æ–‡å—ã®å¤§ãã•ã‚‚å°ã•ã‚ã ãŒã€ã“ã®å•†å“ã¯æ–‡å—表示ãŒå¤§ããã€ã¨ã¦ã‚‚見やã™ã„ã§ã™ã€‚
Martin
2024-11-28 17:34:16
Yes the included hook up info is not very clear so I've included a nice diagram. Works perfectly so far.
Recommended Products
$13.99
$ 7 .99 $7.99