Your cart is empty.
Your cart is empty.Headers blown a gasket and now you have a leak? Not to worry with our 4-2-1 header-downpipe exhaust gasket kit. Includes everything you need from the header to downpipe gasket, studs and nuts to the donut gasket package included: 3 x new studs and nuts, 1 x 2" graphite donut gasket, 1 x graphite coated aluminum core laminate downpipe gasket , this item fits: 86-01 Acura integra, 04-07 Acura TSX, 90-98 eagle talon, 93-97 ford probe, 90-07 Honda accord, 88-00 Honda civic93-97 Honda civic del sol , 88-91 Honda CRX, 92-01 Honda prelude, 91-02 infinity g20, 90-99 Mitsubishi eclipse, 97-02 Mitsubishi mirage, 95-98 Nissan 200sx, 90-06 Nissan Sentra, only fits aftermarket 4 cylinder 2-piece 4-2-1 headers.
Zach w
2025-08-26 15:03:25
The hardware and gasket fits on my 1994 honda accord. I will say to not only use this gasket though i used the oem little circle gaskets and put this gasket around my stock circle ones. It just provides peace of mind for my slammed car. Seems like great quality ill have to post a recap in a few weeks.
Jonathan
2025-08-24 15:15:04
Product stated it fit my 1998 honda prelude. This was misleading. It definitely does NOT FIT my prelude. Poor product
Jay
2025-08-07 11:15:11
Great customer service and exact fit
AYR
2025-08-04 13:41:50
Good parts
Jerri Patterson
2025-08-01 10:24:15
Fit perfectly. Thank you
Christopher
2025-07-29 14:22:31
Bought for my 2001 Prelude and it is smaller than the actual size of the exhaust. This won’t fit my H22a4 OEM exhaust header.
The pissed off dude!!!
2025-07-20 18:03:26
Bought this gasket for my header on my 91 ef with a b20b4 swap. Slapped some copper coating on it and stuck it on. Seems to be holding well and the hardware seems great. Already went through a few good heat cycles and the nuts are still tight and haven't tried to back off or come loose.I'll definitely purchase again.
Derpy_Dude
2025-07-02 13:39:05
So I have a 1997 Hinda Civic and I originally bought this back on March 1st which was not too long ago and installed it next day. Well, maybe 2 months later after installing it I heard another Exaust leak, thinking what the heck happened now! Finally yesterday I got back under doing my oil change and oil pan and gasket replacement with a bud and I find out that the inner part between the 2 metal sections blew out on the thin parts and caused the leak again. Then on the bushing piece that got smashed in a weird way causing it to crack and we originally put it on as best possible where as the original one was still okay looking but definitely not reusable. So this I can't say is quality especially for the price but so far it's all I can find for mine since I have an aftermarket Exaust setup with what the prior owners did. So here we are once again, ordering another and hoping it doesn't have the same issue.
Magda
2025-06-05 15:33:10
Yes, we’re able to use the gasket product and accessories. It fits the requirement parts needed for the exhaust pipe.
Logan D
2025-05-20 18:40:26
Garbage gasket, save some money and time and do not buy this. I should have listened to the other reviews… I installed this on my jdm h22a and it blew out only after a couple drives. I installed it correctly (not my first time) it’s super thin I already knew I’d still have the same issue I originally started with.. buyer beware.
Jacob
2025-05-13 11:42:54
THE STUDS DONT EVEN FIT THE HEADER
Zach w
2025-05-03 18:50:51
The hardware and gasket fits on my 1994 honda accord. I will say to not only use this gasket though i used the oem little circle gaskets and put this gasket around my stock circle ones. It just provides peace of mind for my slammed car. Seems like great quality ill have to post a recap in a few weeks.
Jonathan
2025-04-29 15:24:59
Product stated it fit my 1998 honda prelude. This was misleading. It definitely does NOT FIT my prelude. Poor product
Jay
2025-04-21 09:13:53
Great customer service and exact fit
AYR
2025-03-29 14:27:34
Good parts
Jerri Patterson
2025-03-23 14:51:12
Fit perfectly. Thank you
Christopher
2025-03-22 14:36:27
Bought for my 2001 Prelude and it is smaller than the actual size of the exhaust. This won’t fit my H22a4 OEM exhaust header.
The pissed off dude!!!
2025-03-16 21:55:45
Bought this gasket for my header on my 91 ef with a b20b4 swap. Slapped some copper coating on it and stuck it on. Seems to be holding well and the hardware seems great. Already went through a few good heat cycles and the nuts are still tight and haven't tried to back off or come loose.I'll definitely purchase again.
Derpy_Dude
2025-03-11 18:47:18
So I have a 1997 Hinda Civic and I originally bought this back on March 1st which was not too long ago and installed it next day. Well, maybe 2 months later after installing it I heard another Exaust leak, thinking what the heck happened now! Finally yesterday I got back under doing my oil change and oil pan and gasket replacement with a bud and I find out that the inner part between the 2 metal sections blew out on the thin parts and caused the leak again. Then on the bushing piece that got smashed in a weird way causing it to crack and we originally put it on as best possible where as the original one was still okay looking but definitely not reusable. So this I can't say is quality especially for the price but so far it's all I can find for mine since I have an aftermarket Exaust setup with what the prior owners did. So here we are once again, ordering another and hoping it doesn't have the same issue.
Magda
2025-03-10 13:52:48
Yes, we’re able to use the gasket product and accessories. It fits the requirement parts needed for the exhaust pipe.
Logan D
2025-01-31 18:52:48
Garbage gasket, save some money and time and do not buy this. I should have listened to the other reviews… I installed this on my jdm h22a and it blew out only after a couple drives. I installed it correctly (not my first time) it’s super thin I already knew I’d still have the same issue I originally started with.. buyer beware.
Jacob
2025-01-07 14:12:52
THE STUDS DONT EVEN FIT THE HEADER
Recommended Products
