Your cart is empty.
Your cart is empty.Don Clark
2025-08-14 16:20:50
This is an inexpensive and quick way to jazz up your Audi. I used a flat head screwdriver to pop out the factory puddle light and moved the wiring plug from the old to the new. It lit up immediately. I popped it back in and was done. Fit was perfect.I broke the one on the passenger side by forcing it. I pried it back out in pieces. Back indoors I studied the pieces, reassembled it and then installed it. It works nicely.Note in my pictures that I live on a farm and park offroad. The Audi logo is not as crisp as you'd see on concrete.My 2013 Audi A8 4.0T now has a bit of extra pizazz. I like it!
Ireland
2025-08-09 17:44:32
These are perfect for adding that spice to your Audi. They shine very bright and look so much better than stock. For the price and ease of installation, I would definitely recommend.
Ken
2025-06-09 12:41:38
There's something defective with these unit. I wish I can get a refund or replacement but the mechanic that installed would have to charge me again to replace it.
Webhoncho
2025-05-28 18:19:00
These are nice Audi ring logo door lights which I just installed in our Audi Q3 front driver and passenger doors. I used a small plastic pry lever from another project which made the removal of the original door lights easy and safe. You can use a small flathead screwdriver to pop out the light, just be careful not to poke yourself or the door trim! The original two-wire plug in the door is a perfect fit for the replacement lights. After carefully connecting the light and making sure it worked, I pressed the light back into the door panel and it fit perfectly with a satisfying click.The Audi ring and name show up nicely in the round circle. The logo image is crisp and clear. I highly recommend these lights -- 5 stars for ease-of-installation, quality and clarity of the Audi image, and fancy-looking upgrade to the standard, boring door lights.
Ben Ruset
2024-12-23 16:20:10
I was able to install these in the front doors of my 2014 Audi A8L in about 10 minutes. It was totally plug and play - just gently pry out the puddle lights from the bottom of the doors, disconnect the connector, and plug it into the new modules. They go back up in the door like the originals one did and illuminate the ground with a nice rings logo when the doors open!
Recommended Products