Your cart is empty.
Your cart is empty.Window motor worn out? This power window lift motor is precision-engineered to match the fit and performance of the original motor in specific vehicle years, makes and models for a reliable replacement.
Ant
2025-09-05 16:37:56
After market part but works like the OE. My A/C still needs work so I utilize my power windows a lot!! I live in the desert, Quick note Grease up the tracks as you should. I recommend this part, it’s so easy to install.
Marty
2025-08-22 15:20:04
Fit and worked perfectly. Good replacement part
fixincars
2025-08-12 16:19:32
my only complaint is minor since i was doing both front door window motors at the same time, the motors were labeled on the part for the wrong side but i do think the boxes were marked properly. they work great, very fast and they fit the factory regulator assembly nice, you may have to bump the motors with 12 v to spin the gear so it lines up to your regulator bolt holes. if you get the regulator and motor assembly you wont have to worry about that. connecting the electric was easy with the premade connections provided with the motor. i am very happy but it did bother me a bit that the part said RH and it was bolted to the drivers door window regulator. I did them one door at a time so i did not get them mixed up i even made the owner of the truck look so i was not crazy. but since the boxes were correct if you were only ordering one you should get what you need.
F. Lewis
2025-06-30 12:57:12
Replaced window motor in an ‘88 F150 had a little trouble figuring out how the motor went because I didn’t take it out but after backing off and regrouping I got the configuration of the bolt holes sorted out and it easily went together. Could only get two bolts in it as mentioned in other reviews but it seems to be enough to get the job done. Motor operates very smoothly and is quiet and fast on the roll up. Extra wires sent fit perfectly and had no trouble connecting to the stock harness. A very good deal for a good product would’ve given five stars but they gave no info about bolt pattern not lining up or how to remedy the problem but other than that the motor is A-1 would definitely recommend.
Roger De Leon
2025-06-18 10:53:19
Great product fitted my Ford 1995 perfect, been in operation more then 3 years, less expensive then local parts store, very easy to install
Galen
2025-06-11 11:56:52
good product, however amazon needs to be more specific on what door the part goes to.
Joshua Hughes
2025-05-06 16:43:50
Pro's - the window motor fits my car. It was easy to install and came with multiple pigtails so it works with different applications.Con's - after installing and testing, the window motor is slow and weak. It's barely better than the old factory motor that I replaced b/c it was slow. After several times using it up and down, it's really slow to roll the window up. Unfortunately, I'm past my return period so I can't return it.I wouldn't buy this product, or any dorman product that has an electronic or gear driven motor. dorman help products (plastic pieces, etc) are ok, but I wouldn't buy this window motor.
Bohunkndog
2025-03-08 14:57:22
This was for a 1995 Ford F150 XLT pickup truck. It fit perfectly. Just a few notes for others to consider. Part of the housing for the gear area is black plastic. Ok, everything is plastic nowadays. The original was metal. Anyhow, the screws supplied are self threading so you don't use the original Ford screws. Some reviews state that the unit has only two mounting holes that fit the truck. This COULD be the case if you attempt to install it upside down. It'll fit but only two screw holes will appear. I know! I tried it. So, just beware that the unit needs to have the black gear area facing upward. Also, find a 2 or 3 foot stick dowel and attach a magnet to the end of it. This will be to fetch the screws that will drop into the lower door area. Trust me I've installed 3 of these and I still end up dropping screws countless times. I also treated the electric connections with electric silicone grease to protect it from corrosion. Same stuff we use on spark plugs or any electrical connectors. You need to have the window in the up position so that will be first on your list before you do anything. It will come crashing down after you remove the old motor so make sure you use wire or something to hold it up by one of the crank arms. Just wire it through the crank arm and over the top of your door.P.S. On my truck I needed to drill out two holes in the door panel where the screws would be extracted. Ford didn't drill any. Also grind down a section of door metal to retrieve the right side bolt. Just about 3/8 inch should do. Then after you're all done go have yourself a stiff drink and pat yourself on the back.
biggrin
2025-03-05 15:35:04
Fit my 1986 F-250 exactly. The wiring harness I needed was included. After a couple months use in cold weather it has worked perfectly. Recommended for a low cost replacement.
Customer
2025-02-26 09:51:58
Used this to replace the motor of my louvered roof. so far it works like a charm.
bneee
2025-02-16 16:42:26
The unit is lighter duty than the OEM unit but it fits and functions perfectly. It is a great product for the money. I ordered it online on Saturday evening and it was sitting on my doorstep Monday afternoon. Very happy with my purchase and Amazon.ca!!
Cindy
2025-01-10 15:02:14
Part was a quality looking item, it just wasn't the right one for the application I was going to be using it for
EG
2025-01-06 14:27:56
As desribed, not so easy install but works great
Recommended Products
$69.99
$ 28 .99 $28.99
$27.59
$ 11 .99 $11.99
$37.80
$ 18 .99 $18.99