Your cart is empty.
Your cart is empty.Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.
Eddystone
2025-08-20 15:35:15
The Jiffy Clips holding transmission lines connected sometimes cannot be removed, even using the correct tool. I got three of the four clips on my lines off, but for the last I had to cut the pipe with a Dremel cutoff wheel and then remove this fitting from the radiator using a socket wrench. The factory fitting is extremely tight in the radiator and take a lot of force to unthread and remove from the radiator. However, with sufficient torque the fitting will come out without damaging the radiator. A LOT of torque to remove. These Dorman replacement fitting come with thread sealant already installed, and the thread right in easily. The standard GM transmission line metal pipes fit right in and seal properly. Note: It may not be obvious, but the Jiffy Clips are designed to not have to be removed. The removal tool fits around the pipe and spreads the clips without removing them. The pipe pulls out through the removal tool. To connect the pipe to the fitting, just push it in with the Jiffy Clip already in place. It will go in and lock.
False advertising
2025-07-14 20:31:38
I ended up using these to add a transmission cooler to my 2014 GMC Sierra 1500. I did need to use a rubber washer inside because I was using a brass connector.
Derrick
2025-06-07 18:07:16
Works well and fit perfect
Fisherman
2025-05-26 16:39:53
Worked out nice . Good value for the money
Alex
2025-05-15 13:32:49
Leaked right out of the package. Replaced with an OEM and no issues.
Roxanne Maxson
2025-03-28 19:23:52
Quality product worked right the first time.
sharon P shoch
2025-03-06 15:23:05
Perfect
Earl Cordova
2025-02-03 13:41:36
Doesn't work as well as the OEM version.
Recommended Products
