Your cart is empty.
Your cart is empty.A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle's evaporative emissions system.
Murf
2025-09-01 10:13:46
Works for 2004 Honda CR-V.The screw size is metric M5x0.8. I got mine from a home improvement store. Get the shortest they have. On my canister, it appears there is nothing for the screw to bottom out on. So it didn't matter that it was a little long. I couldn't get one of the old screws out so I cut it off with angle grinder. Used RTV high tack sealant to hold it down on that side. Even with that, after I reset code, the check engine light stayed off. So this appears to have fixed the problem.
-=Rudy=-
2025-08-21 14:11:51
Anyone who owns an older Honda/Acura knows the story--at some point, the OBD2 evap code will appear and it will need troubleshooting to find the specific problem, then replace what is needed.This particular sensor attaches to the charcoal canister underneath the car, in front of the gas tank. So you'll need some sturdy jack stands to get that far underneath. While I got the canister removed without a problem, the screws holding this solenoid to the canister were pretty much "rust welded" into place. The plastic mounting flange on the vapor canister holds two brass threaded inserts and unfortunately, both of mine spun out of the housing, leaving me with two larger holes.Many mechanics at this point would order a new canister. Instead, I filled both holes with epoxy and let them cure overnight. Once hardened, I drilled a very small pilot hole in each one. From my stash of spare parts, I found two self-tapping screws that fit perfectly. Once I reattached the solenoid, I lightly tightened the screws (they do not need to be very tight--the solenoid is mostly held in place with its o-ring) and reinstalled the canister. Problem solved!And, no issues with this sensor either. Some aftermarket parts do fail to work, but this one I have had no issues with thus far.
Customer
2025-07-30 13:18:11
Part fit well and price was responable
Popadopolas
2025-07-18 17:29:47
I didn't get to install it yet, but it seems to be an exact match. My code actually dropped...which is strange so if it pops back up I will put the new part on. If its good or bad I'll edit the review. Overall looks like an exact match. I'm in a 2005 Honda Civic DX (D17A1).UPDATE** I ended up having to get a whole new vapor canister. This part was perfect and would have fit but I wasn't able to get that old one off the canister. Stuff was rusted to hell and looked like a previous owner was trying to get in there so things were cracked or almost broke off. If you are able to get this part off your canister then this will be the replacement you're looking for.
Raul
2025-06-20 12:11:55
Good quality
Frederick3589
2025-06-11 16:23:47
Hi, if you are unsure how to do this watch youtube video by piercedasian Honda evap solenoid p1457 repair. I followed his steps exactly and good thing his tips make it easy took me about an hour. I have an 2.0L 05 ep3 si hatchback. I was able to pass Md. emissions test:) Your time may shorter for the repair I’m still learning how to work on my car. This skill level 2 out 5 if you attempt. Hope this helps. This is cheaper than having to replace the whole canister.
Janice A. Piunno
2025-05-06 15:34:56
My check engine light is out, very happy.
METCO
2025-04-25 12:33:03
If you have the right tools, and equipment! yes. Buy the screws that this unit will need. the old ones will be very rusted and probably junk. The old one had the sleeve the screw needed, it extracted with the old screw from the canister. Could have been an issue. I was able to separate the screw from the sleeve and with some heat, replace it back into the canister. All said and done, it was good in the end. GET NEW SCREWS
MAC
2025-03-09 20:00:59
Fits 04 Civic perfectly. So far working with no issues or engine light. Seems to be just as good as OEM. Dealer wanted $110 for OEM, seems to be same quality as the OEM part. Not sure about the guts. I have heard positive feedback regarding Doorman parts by mechanics.
A.B.
2025-02-17 19:27:04
Part fits and works like the original.
SHeathcote
2025-02-14 18:36:22
Fits my 2003 Honda Civic SIR. Check engine light came on with Code P1457. This code can mean a number of different things but after some research the most common issue is the EVAP Canister Valve. Ordered this part, it arrived quickly and fits perfectly. It appears to be identical to the factory part for much less money.As an aside I would recommend that while you are doing this that you also replace the Vapor Canister itself. This part can also be a source of the code, additionally if you drive in an area with road salt the screws holding the EVAP Canister Valve on the Vapor Canister will be corroded to the point that you may not be able to get them off (or like me will break things while trying to get them off). As a result I would recommend having a new Vapor Canister and new screws on hand while doing this repair, worst case you can return them if you do not require them.
Wade
2025-01-06 11:32:02
Worked perfect. Timely delivery. Fixed my car
Kyle
2024-12-12 10:45:02
Took forever to arrive but fit my car perfectly and cleared my check engine light
Recommended Products
