Shopping Cart

Your cart is empty.

Your cart is empty.

Dorman 924-221 Rear Brake Dust Shield - 1 Pair Compatible with Select Cadillac / Chevrolet / GMC Models

Free shipping on orders over $29.99

$29.26

$ 13 .99 $13.99

In Stock
  • Effective replacement - designed to match the fit and function of the stock brake dust shield on specific vehicle applications
  • Longer service life - corrosion-resistant steel construction protects brakes from elements and debris
  • Ideal fix - directly replaces highly deterioration-prone original part
  • Precision-engineered - has undergone dimensional verification and salt spray testing to ensure quality
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool


Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life. Vehicle model years this part fits (be sure to check your vehicle trim using the Amazon garage) - [Cadillac Escalade ESV: 2003, 2004, 2005, 2006] - [Cadillac Escalade EXT: 2002, 2003, 2004, 2005, 2006] - [Cadillac Escalade: 2000, 2002, 2003, 2004, 2005, 2006] - [Chevrolet Astro: 2003, 2004, 2005] - [Chevrolet Avalanche 1500: 2002, 2003, 2004, 2005, 2006] - [Chevrolet Express 1500: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014] - [Chevrolet Silverado 1500 Classic: 2007] - [Chevrolet Silverado 1500: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [Chevrolet Suburban 1500: 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [Chevrolet Tahoe: 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [GMC Safari: 2003, 2004, 2005] - [GMC Savana 1500: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014] - [GMC Sierra 1500 Classic: 2007] - [GMC Sierra 1500: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [GMC Yukon XL 1500: 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [GMC Yukon: 2000, 2001, 2002, 2003, 2004, 2005, 2006]


Sig
2025-09-05 11:17:58
Used these to replace factory dust shields that had seen better days. These were an exact fit and will be good for another 15 years. Typical Dorman, high quality!
Marquess Scott
2025-09-02 10:05:42
I let mine sit for 24 hours before I filled the rear just cause that’s the kinda luck I have if I didn’t but it fit great and doesn’t leak
Richard W binghaman
2025-08-31 17:57:01
perfect quality, great prices 'thus far' 1 point I shall add is be sure to purchase the 2 piece dust shields unless you want to remove the axles to.I had to cut mine in half but it yett fits perfectly just make sure you get 2 bolt holes per side top and bottom.
NDB Shopper
2025-08-05 17:48:04
Bought these to replace my completely rotted out old dust shields while doing a bunch of other work (rear wheel bearing & seal replacement and new rear brakes & rotors). You have to pull the rear axles to replace these which wasn't an issue given the other work I was doing (Dorman does make a 2-piece version of these that you can replace without pulling the axles so I'd definitely recommend those if you aren't already planning to pull axles for other reasons). These install fine, however, they will SQUEAK something fierce until you break them in. I was worried I got bad ones when I first finished up but after doing some research it looks to be common until you put some miles on them. After a few days of driving they wore down enough and no longer make any noise at all.
Andy White
2025-08-03 15:03:51
Bolted them on and threw my brakes on.
Larry Sheffield
2025-06-26 15:51:18
Showed up all bent up couldn’t even use them!
Joe Raposa
2025-06-10 14:24:11
Look and fit on axle great. When it was time to put my rotors on I had to bend it and hit it just to avoid coming in contact with it. Even with some metal work it was still squealing for about 100 miles until it wore down. This was on my 2003 suburban 1500 z71. Could be different on other years
Gregory Huber
2025-05-19 18:02:17
They seem nice an sturdy. Good value
peter stahldorf
2025-04-16 11:47:43
Great replacement part at a great price
Marvin Zak
2025-03-23 18:19:32
Fit nice
Molly C
2025-03-20 17:16:54
Same as original. Arrived quickly. Happy with item. No problems at all
Donna Pedersen
2025-01-26 21:10:26
Had to use a hammer to tap in one spot on the plate as it was rubbing on the rotor. Not a big deal to me but just be aware that this could happen to you.
Ram
2025-01-19 18:39:53
I liked cause of the one piece design very easy to put product into use