Your cart is empty.
Your cart is empty.When a truck bed rusts out, the only option has been to replace the entire bed. This Dorman OE FIX bed floor patch panel allows you to weld on a new piece that matches the original in design and appearance. Vehicle model years this part fits (be sure to check your vehicle trim using the Amazon garage) - [Ford F-250 Super Duty: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Ford F-350 Super Duty: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Ford F-450 Super Duty: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016]
Customer
2025-08-23 16:53:14
The media could not be loaded.
Lehr Harner
2025-08-12 13:15:20
Was happy with this panel
Phil
2025-08-09 18:48:59
I bought 2 of these panels here and a third from another source, and all 3 were delivered bent up. It seems no matter where you get them, expect they'll need some fixing upon receipt. I used these to repair some rather significant rust in the bed of a 2006 F-250 and they fit well. They were the same gauge as OEM and the bends in the panel lined up with the bed. My biggest complaint however is that the paint they used on the panels is NOT weldable. As a result, in order to weld it you have to remove the paint in those areas which seems counter-productive. It would have been much easier and more effective if they had used weld-through primer.
justamannh
2025-08-08 10:20:28
While reading the description of this repair panel, there seemed to be some confusion about what it actually fit.In my case, it matched the bed contours of my 2012 F350 perfectly.It was well packaged and arrived dent free.I was going to grind off the green primer but it seemed firmly attached so I left it there.I used black Sika Sikaflex-221 to glue it on, one tube was enough.Hope this helps
LaDeadre Schanick
2025-08-04 14:28:59
Awesome
robert
2025-07-31 10:14:29
Got bit in the butt again repair used like new never used was 1 1/2 inch short on length and 1 1/2 inch short on width. was never used looks like might of missed going thru quality control HA HA,
Robert L.
2025-07-13 13:54:34
Even though Amazon garage said it wouldn't fit my F350, it did. This is the perfect fix rather than body shop repair.
Donald M
2025-07-11 11:19:22
Mine came in damaged still usable but if your looking to make it look good may be an issue no corner support in shipping box at all but kind of figured damage would happen during shipping because of the items size, Update after doing the prep work on my bed realized the product was an inch or so short on length and width. Advertised dimensions are either wrong or QC is bad 👎 not impressed when I'm paying 42$ for some sheet metal that's not shipped or cut properly evidence of lack of care is apparent
Lorne Bruce
2025-07-09 10:45:11
Fit and matched my F350 super duty perfectly. I had enough to make 1 for my truck and two more to sell.
Marlene E.
2025-07-06 10:22:29
Arrived very quickly, very easy to work with, cut nicely and takes paint great.
Zager
2025-06-29 16:10:32
Overpriced for what it is
Blake
2025-06-11 18:13:25
First time - good solid steel but damaged in 4 placesSecond - ordered 2, was sent one along with a wrong item, the one i did receive didnt fit my f150 and was damaged AGAIN. DO NOT BUY
Melanie
2025-06-09 19:45:10
Nice panel but didn't work for a 09 Ranger . The stamping was a different pattern than the Ranger bed floor . Must fit full size ford trucks. I was surprised to find 2 panels in the box. I'm not sure if it was a shipping mistake or if the description was not clear on quantity. I only expected 1 panel .
Customer
2025-05-27 11:28:36
The media could not be loaded.
Lehr Harner
2025-05-19 13:49:43
Was happy with this panel
Phil
2025-05-09 19:17:10
I bought 2 of these panels here and a third from another source, and all 3 were delivered bent up. It seems no matter where you get them, expect they'll need some fixing upon receipt. I used these to repair some rather significant rust in the bed of a 2006 F-250 and they fit well. They were the same gauge as OEM and the bends in the panel lined up with the bed. My biggest complaint however is that the paint they used on the panels is NOT weldable. As a result, in order to weld it you have to remove the paint in those areas which seems counter-productive. It would have been much easier and more effective if they had used weld-through primer.
justamannh
2025-05-01 12:41:19
While reading the description of this repair panel, there seemed to be some confusion about what it actually fit.In my case, it matched the bed contours of my 2012 F350 perfectly.It was well packaged and arrived dent free.I was going to grind off the green primer but it seemed firmly attached so I left it there.I used black Sika Sikaflex-221 to glue it on, one tube was enough.Hope this helps
LaDeadre Schanick
2025-04-16 12:03:35
Awesome
robert
2025-02-21 17:53:41
Got bit in the butt again repair used like new never used was 1 1/2 inch short on length and 1 1/2 inch short on width. was never used looks like might of missed going thru quality control HA HA,
Robert L.
2025-02-19 14:22:02
Even though Amazon garage said it wouldn't fit my F350, it did. This is the perfect fix rather than body shop repair.
Donald M
2025-02-12 18:04:52
Mine came in damaged still usable but if your looking to make it look good may be an issue no corner support in shipping box at all but kind of figured damage would happen during shipping because of the items size, Update after doing the prep work on my bed realized the product was an inch or so short on length and width. Advertised dimensions are either wrong or QC is bad 👎 not impressed when I'm paying 42$ for some sheet metal that's not shipped or cut properly evidence of lack of care is apparent
Lorne Bruce
2025-02-07 12:35:01
Fit and matched my F350 super duty perfectly. I had enough to make 1 for my truck and two more to sell.
Marlene E.
2025-01-23 11:25:44
Arrived very quickly, very easy to work with, cut nicely and takes paint great.
Zager
2025-01-12 16:08:39
Overpriced for what it is
Blake
2024-12-29 12:02:10
First time - good solid steel but damaged in 4 placesSecond - ordered 2, was sent one along with a wrong item, the one i did receive didnt fit my f150 and was damaged AGAIN. DO NOT BUY
Melanie
2024-12-12 13:22:09
Nice panel but didn't work for a 09 Ranger . The stamping was a different pattern than the Ranger bed floor . Must fit full size ford trucks. I was surprised to find 2 panels in the box. I'm not sure if it was a shipping mistake or if the description was not clear on quantity. I only expected 1 panel .
Recommended Products
