Your cart is empty.
Your cart is empty.Product Description
Fuel Injector Noid Light Test Kit
Fuel Injection Troubleshooting
Check injectors whether receiving a signal from the ECU/PCM/PMU/AARP/NATO/NASA to spray, Plug these into the connectors for your injectors, idle air control, etc., to rule out any electrical issues. the Noid lites confirm the injectors are getting the signal to open and close, Crank the engine and test for a signal, noid light flashes means injector pulse normal.
8pc Noid Light
compatible with GM PFI;
compatible with GM TBI;
compatible with GM SCPI;
compatible with GM Multec2;
compatible with FORD TBI;
compatible with Geo TBI;
compatible with BOSH PFI;
compatible with Bosch2.
IAC testers
compatible with GM IAC testers, fit flat and square four connector.
Harness Extension Cable
Harness extension cable length 47 inches, It's extremely easy to hook this all up, you can sit in the drivers seat and watch the end of the extension while cranking the engine over.
The Cat Family
2025-09-03 16:49:49
Worked for my needs. Pretty simple, just a light in a holder with pins that fit the connector on your fuel injector. The "cable" looking thing confused me because they stuck the suction cup on the end of the cable. It's fiber optic and you put the noid in one end (the one with the big cup) so that the light on the noid shined into the fiber optic cable and you can see the light come out the other end AFTER you take the suction cup off that other end. The suction cut snaps into that ring thing on the side. Theoretically you can suction cup it to something so you can see it inside the car. Good luck with that as the cup is a bit distorted and probably won't stay stuck for long. But the fiber optic cable is long enough you can probably get it positions so you can see it.
William 808
2025-08-31 13:07:22
Nice quality great for the amateur mechanic easy to use
Reinier arce
2025-08-06 21:53:42
Hasta ahora no lo e usado la primera vez pero todo se ve en exelentes condiciones el artÃculo a pesar que no es de marca reconocida hace el trabajo o al menos eso creo por qué como dije no lo e usado aún
Shirley E Platek
2025-07-21 10:07:44
That the switch is in the OFF position so no gas will flo thu turn it ON
DW Miller
2025-07-16 14:59:00
Just needed the GM noid, and it worked fine. The fiber optic extension was super handy, made seeing the flashes easy. I thought the quality was fine, didn’t feel brittle or delicate. Nice tool to have handy.
Chris Trinkle
2025-07-13 18:13:08
The kit does not include instructions and the noids are not labeled.
Ricardo Gomez
2025-06-04 13:48:15
...
Domingo Galvan
2025-05-29 20:30:54
This tool saves you a lot of time if you work alone like I do saves you money.
Butts
2025-05-05 10:56:45
Very handy for testing injector circuitry. Easy to use. Several different fitments.
Omkar R
2025-04-21 16:26:08
was tracking down a now start issue and this help narrow down the issue. for the price its another tool that will be useful in the future.
Bill
2025-03-21 18:38:53
Works as they should znd arrived on time. Don't shake or drop the case as the lights may be damaged. The lights rattle in the case so had to put some foam inside to protect them.
Customer
2025-02-27 16:54:38
It does the job very well. Have no problem with it.
Mr Mike
2025-02-17 18:03:06
Had the fitting I needed and revealed the electrical issue I was diagnosing on a misfire
Recommended Products