Your cart is empty.
Your cart is empty.Make the most of your Dremel rotary tools by using our innovative & extensive line of rotary accessories and attachments. Whatever your project, we’ve got the perfect solution for you. Dremel attachments fit onto your rotary tool to give it a dedicated function. Whether you’re looking to carve, engrave, cut or grind, there is a Dremel attachment to get the job done. A must have for any Craft & Hobby enthusiast. The Dremel 490 Dust Blower fans away dust for greater visibility to your work piece. By removing fine debris from your line-of-sight, the small air blower is great for detailed projects, sanding, engraving, and carving. The 490 fits on all rotary tools with a standard collet nut; can also be used with the 225-01 Flex Shaft attachment. Compatible with most Dremel corded and cordless rotary tools and backed by a 1-year limited warranty.
AWag
2025-08-11 13:06:30
Wasn't sure if I would notice any difference with this product. It keeps all of the shavings and debris out of the way very well. Probably won't use my dremel without one again. Definitely a must have.
gp
2025-08-02 12:33:39
The dremel fan works as advertised. Easy to install and keeps the area you are working on clear of sawdust. I read reviews from a few people saying that the fan broke easily. I did not find that. It is well made and feels solid for being as small as it is. This is a great product for anyone doing engraving or detailed woodworking
Omega Man
2025-07-18 13:35:40
This blower does work, but the extra mass seems to throw some tools off balance slightly causing vibration. I don't have an actual Dremel handy to say if this happens on the actual Dremel models or which ones, but note that it can be an issue even when the collar fits the threads and such.The other issue I encountered with the DEPSTECH 8V is also probably the "fault" of the DEPSTECH which is that it seems to be harder to get the collet tight compared to the one included with the DEPSTECH. This combined with the vibration can cause bits to start sliding in and out, or fall out, which is bad. So also note that even when the threading and such is the same, if every little other dimension and angle is not exactly right the fit won't be perfect, causing some issues.As others have mentioned, sometimes the blower is just too bulky for what you're trying to do and it gets in the way. So don't throw out your original collet collar because you're not going to always want the blower. But for less than $5 I have to give this one 4 stars.
James Jones
2025-07-09 10:07:50
Works as expected.
SKA
2025-07-06 14:09:21
Its well worth the money just to have an additional nut if not anything else. However it is very small and very weak. So don't expect anything major, because that's not this. Im not sure if I even notice it half of the time.I wish they'd make a larger one that was a tool attachment by itself. Something that was large and powerful enough to dust yourself off like an air compressor would.Ahh to dream...
Customer
2025-07-03 18:05:43
Blows dust while making intricate cuts. A fan would work just as well.
Joe P
2025-06-19 17:55:22
Love this little fan. No more dust in the face
Tom's Art Rocks!
2025-06-18 10:08:13
There's nothing to dislike about this item! It was very inexpensive, and potentially will extend the life of my rotary tool(s) . It blows the dust and debris away from your project, giving you better visibility, the away from the tool, preventing it from getting inside and fouling up the brushes or other internal parts of the tool. For the record, my rotary tool is not a Dremel, but it was perfectly compatible.
Bluefin565
2025-05-27 15:57:46
Helps keeps dust and debris away.
JB
2025-04-27 12:31:18
It works at keeping the cut line visible.
Guillermo Fernandez
2025-04-02 12:23:06
No me gustó que no se explica bien en las instrucciones la forma de empotrarlo al aparato. A picando el sentido común, final fue fácil
KundeTrucker - Benno
2025-02-20 12:03:02
ware + Service + zoll + Amazon + Transport - Service = volle 5 Sterne, redlich verdient - Dankeschön !!! -
Raymond Psaila
2025-02-09 16:58:26
This is One of the Best Add On to Any Dremel Multi ToolTo keep the dust aways as you work is just turning a task to a pleasureWhen carving or engraving Its a must for any Dremel Multi Tool.
Recommended Products
