Your cart is empty.
Your cart is empty.High Speed Steel Ball Joint Taper Reamers are for use in enlarging or deburring tapered holes. They are commonly used in ball joint studs and tie-rod ends. Ball Joint Taper Reamers can also be used in a 1/2" chuck by simply removing the T-handle.
Jerry D.
2025-08-31 12:18:15
Worked great for opening up a tie rod hole in a new dropped spindle. Using a 1/2 drill made the job much faster.
Karl M.
2025-08-02 12:53:45
Works as it should. If you use it properly with cutting oil, stays VERY sharp and does quick work.
Andrew F.
2025-07-03 18:12:42
Did what I needed. Used in a drill press on slow to enlarge mustang II knuckles to accept SN95 lower control arms/ ball joints. Only did the two, but still sharp.
silvia morin
2025-05-03 18:05:12
Does not hold edge dulls after just one use the useless too much $$ for one time use tool
Mack Matos
2025-04-11 18:44:01
Awesome, worked great on ball joint to make larger hole, Sharp cutting
Marty
2025-04-02 16:48:58
Reaming out a steering arm of the same taper as the reamer itself. I didn't need to ream out much and should have been able to do it by hand but this reamer would not cut. I know how to ream and used plenty of cutting oil. All it did was rub. I think I got a bad one.
Tea lover
2025-02-11 13:57:09
Well made. Does the job
Brad Ballard
2024-12-28 12:47:20
Cleaning up the steering arm rod end receiving bores is easy with this reamer.
Dave
2024-12-25 20:31:44
Took all of ten minutes to sufficiently enlarge a taper to accept a larger balljoint, and that by hand. I should point out it would have been even faster but I was exceedingly careful as these uprights (Merkur XR4Ti) are now unobtainium.
Customer
2024-12-13 17:52:13
The tool was very handy to have when I made some lower ball joint inserts on a Mk1 Cortina, even by hand operation the tool easily went through enough mild steel to create a perfect fit for the ball joint stud.
Art
2024-12-03 13:48:35
Reamed the first hole 90% of the way and it dulled out definitely not the best. I used lots of cutting oil and slow speed. Don't waste your money.
Recommended Products
$72.00
$ 29 .99 $29.99
$567.25
$ 99 .00 $99.00
$92.65
$ 39 .99 $39.99
$61.62
$ 29 .99 $29.99