Your cart is empty.
Your cart is empty.Product Description
Keyed Exterior Lever
The Dynasty Hardware Exit Panic Device comes with an exterior lever that can be either locked or unlocked using the set of keys which are included
- ANSI Function 08
- Uses "C" Keyway
Dogging Key
Each Dynasty Hardware Exit Devices comes with a dogging key.
Dogging is a function of the exit device on the inside of the door. Dogging is when the latch of the device is mechanically held retracted by locking the panic device in the depressed position. When the device is in the dogged position the door can be opened by simply pushing on the inside or pulling on the exterior handle. This is a great feature for doors that receive heavy traffic.
The device can be dogged using the hex key that comes with the device. Simpy insert the key into the hole on the push pad and turn.
Exit Device Can Be Cut To Fit Your Door
The Dynasty Hardware Exit Device can be cut to fit your door.
- Fits doors that are between 30 and 36 inches in width
- For use on either wood or metal doors
- Overall exit device length is 31 inches
- Includes all mounting hardware
Customer
2025-09-03 16:11:32
i was a little scared at putting this on my door but i was able to do it and it works perfect.
Chase
2025-07-30 12:55:31
The product is as described by the product description (and by other reviewers). Seems very well made and heavy duty, but as other reviewers mentioned the directions are dreadful, and they refer to a template that is nonexistent, but install was fairly easy.I had to do quite a bit of tinkering to move the old key cylinder into the new handle, but even that wasn't too hard. I suggest watching a YouTube video or two showing professionals installing push bars, as their tips + common sense are infinitely more helpful than the enclosed directions.Product serves the purpose we needed it to, appears as if it will last, and came on time from Home Hardware Central.Updated/Simplified Directions for those that need them:1. Remove old lock set if needed2. Remove head and end covers from push bar3. Mount outside door handle4. Hold push bar on inside of door, use a level to make sure it's straight, and mark the holes5. Leave bar to the side and drill holes6. Attach bracket to hold butt end of push bar7. Insert bar into bracket and put in rest of the screws8. Mount roller latch to frame9. Reattach head and end covers
ojait2
2025-05-31 18:56:33
A tenant in a commercial building has had problems with the existing push bar opener. Rather than attempt a repair I opted for a new push bar. I paid for faster delivery and it arrived with no delays. Upon examining the new push bar I noticed it had some heft and was solid. The actual lock mechanism worked smoothly and easily when the bar was pushed. The chassis assembly that houses the lock was solid and strong. All other non-locking parts (i.e. push bar, cover plate and exterior door knob) are brushed (dull) aluminum. Due to my own fault I never installed the device. I failed to notice in the 'Customers Q + A' the answer for door stile width. It states: "... not for glass door stiles under 6 inches". My bad! I was able to repair the original mechanism, but if I ever need another new push bar this is the one I may order.
D
2025-05-27 18:09:50
Would recommend. Easy to install and has held up well so far!
Moe Allen
2025-05-13 21:51:06
We install it works fantastic customers happy with it
James
2025-04-19 18:53:54
I’ve installed a few of these on high traffic doors. Needed a little adjustment but otherwise good enough.
Cindy C
2025-04-10 17:47:48
My husband needed these for a remodel job at a church. These were exactly what he needed, installed easily, and are heavy duty. He said he'd purchase these again if needed.
Asher C.
2025-02-24 20:53:08
My review was going to be good. It was going to be phenomenal. I was happy about the price. My only sugges Was that they would be better off including self drilling sheet metal screws because the ones I used made it a breeze. However the locking mechanism in the handle is miserable. Even reading the instructions I can’t get it to go to where the handle is unlocked. Unlocking with the handle is completely counterintuitive because you have to turn counterclockwise and pull the handle clockwise at the same time. Now I’ll probably have to take the thing apart and try another one.
Shadi
2025-02-09 09:46:28
Not proper fitting
Customer
2025-01-26 10:40:26
Product installed easily and works well. Not as substantial as what it replaced so no idea of longevity.For the price seems to be a good deal.
Louis
2025-01-16 17:14:42
Qualité moyenne à casser au bout de 3 mois à mon commerce
jayhaan77
2025-01-09 17:40:39
Package came with wrong size.
Paul Green
2024-12-23 11:27:04
The panic hardware that was purchased was broken and does not work. The cylinderial handle part of the hardware will not work. Is there a way to rerturn this package and get it replaced. Please advise.
Recommended Products
$446.17
$ 99 .00 $99.00